# PIC Microchip

**URL:** https://forum.core-electronics.com.au/c/general/pic-microchip/26.md

[Latest](https://forum.core-electronics.com.au/latest.md) · [Categories](https://forum.core-electronics.com.au/categories.md)

---

## [About the PIC Microchip category](https://forum.core-electronics.com.au/t/about-the-pic-microchip-category/59)

<div class="topic-metadata">

**Author:** [@Graham](https://forum.core-electronics.com.au/u/Graham)\
**Replies:** 0

</div>

The original maker hardware. Many a great Maker cut their teeth programming on one of the PIC family of microcontrollers from Microchip - and they’re still a popular choice for many Makers to this day. If you haven’t he…

---

## [Need Help With Pwm In PIC16F628A](https://forum.core-electronics.com.au/t/need-help-with-pwm-in-pic16f628a/776)

<div class="topic-metadata">

**Author:** [@yumi22820](https://forum.core-electronics.com.au/u/yumi22820)\
**Replies:** 1\
**Last updated:** [20 February 2017 21:52 UTC](https://forum.core-electronics.com.au/t/need-help-with-pwm-in-pic16f628a/776 "2017-02-20T21:52:49Z")

</div>

code: #define XTAL\_FREQ 20MHZ /\* Crystal frequency in MHz \*/ #include \<pic16f628a.h\> #include \<xc.h\> #include "delay.h" // CONFIG #pragma config FOSC = HS // Oscillator Selection bits (XT oscillator: Crystal/resonato…

---

## [Problem implementing USB and I2C in PIC18F25K50](https://forum.core-electronics.com.au/t/problem-implementing-usb-and-i2c-in-pic18f25k50/597)

<div class="topic-metadata">

**Author:** [@yumi22820](https://forum.core-electronics.com.au/u/yumi22820)\
**Replies:** 1\
**Last updated:** [8 December 2016 22:57 UTC](https://forum.core-electronics.com.au/t/problem-implementing-usb-and-i2c-in-pic18f25k50/597 "2016-12-08T22:57:20Z")

</div>

Hello, My current project uses a PIC18F25K50 to interface with an ADC via I2C, and sends the result to the PC via USB. After much effort I have successfully set up the USB interface, taking example code from the Mi…

---

## [PIC32 I2C not operating as expected](https://forum.core-electronics.com.au/t/pic32-i2c-not-operating-as-expected/524)

<div class="topic-metadata">

**Author:** [@yumi22820](https://forum.core-electronics.com.au/u/yumi22820)\
**Replies:** 1\
**Last updated:** [17 November 2016 22:53 UTC](https://forum.core-electronics.com.au/t/pic32-i2c-not-operating-as-expected/524 "2016-11-17T22:53:53Z")

</div>

I'm having a problem getting I2C running with a PIC32MX795F512L. It was not acknowledging the address byte being sent out, so I put a logic analyzer on SDA and SCL and got the trace shown below: \[image\] The two excursion…
