# Raspberry Pi

**URL:** https://forum.core-electronics.com.au/c/general/raspberry-pi-australia/13.md

[Latest](https://forum.core-electronics.com.au/latest.md) · [Categories](https://forum.core-electronics.com.au/categories.md)

---

## [About the Raspberry Pi category](https://forum.core-electronics.com.au/t/about-the-raspberry-pi-category/46)

<div class="topic-metadata">

**Author:** [@Graham](https://forum.core-electronics.com.au/u/Graham)\
**Replies:** 5\
**Last updated:** [16 September 2023 01:38 UTC](https://forum.core-electronics.com.au/t/about-the-raspberry-pi-category/46 "2023-09-16T01:38:01Z")

</div>

On February 29, 2012 the first Raspberry Pi was launched. Little did Earth know just how generally awesome that little credit card computing platform would change the world! We stock official gear from Raspberry Pi in Au…

---

## [Two Hailo-8 accelerators on one Raspberry Pi 5 with the Seeed dual M.2 HAT](https://forum.core-electronics.com.au/t/two-hailo-8-accelerators-on-one-raspberry-pi-5-with-the-seeed-dual-m-2-hat/24580)

<div class="topic-metadata">

**Author:** [@Aaron268548](https://forum.core-electronics.com.au/u/Aaron268548)\
**Replies:** 0\
**Last updated:** [13 November 2026 09:48 UTC](https://forum.core-electronics.com.au/t/two-hailo-8-accelerators-on-one-raspberry-pi-5-with-the-seeed-dual-m-2-hat/24580 "2026-11-13T09:48:56Z")

</div>

Using the Seeed PCIe 3.0 to dual M.2 HAT, and what to do when the Pi will not boot with it\*\* A Raspberry Pi 5 has one PCIe connector, so normally it takes one M.2 device: one SSD, or one AI accelerator. The Seeed dual …

---

## [Raspberry Pi 4 Model B 2GB (CE06424)](https://forum.core-electronics.com.au/t/raspberry-pi-4-model-b-2gb-ce06424/7326)

<div class="topic-metadata">

**Author:** [@Core](https://forum.core-electronics.com.au/u/Core)\
**Replies:** 13\
**Last updated:** [10 November 2026 07:00 UTC](https://forum.core-electronics.com.au/t/raspberry-pi-4-model-b-2gb-ce06424/7326 "2026-11-10T07:00:14Z")

</div>

This is a placeholder topic for “Raspberry Pi 4 Model B 2GB” comments. The 2GB variant of the Raspberry Pi 4 Model B Read more

---

## [Pi Pico 2H not aligning with ZY-60 Breadboard](https://forum.core-electronics.com.au/t/pi-pico-2h-not-aligning-with-zy-60-breadboard/24516)

<div class="topic-metadata">

**Author:** [@bread\_board](https://forum.core-electronics.com.au/u/bread_board)\
**Replies:** 12\
**Last updated:** [30 October 2026 06:21 UTC](https://forum.core-electronics.com.au/t/pi-pico-2h-not-aligning-with-zy-60-breadboard/24516 "2026-10-30T06:21:13Z")

</div>

i recently purchased a Raspberry Pi Pico 2H and a ZY-60 Breadboard. it just arrived today - and i happily tore open the packaging and began building, only to be immediately distraught by the pins of the Pico being misali…

---

## [Case for Pi 5 Model B 8GB](https://forum.core-electronics.com.au/t/case-for-pi-5-model-b-8gb/24524)

<div class="topic-metadata">

**Author:** [@Bruce329941](https://forum.core-electronics.com.au/u/Bruce329941)\
**Replies:** 3\
**Last updated:** [29 October 2026 01:47 UTC](https://forum.core-electronics.com.au/t/case-for-pi-5-model-b-8gb/24524 "2026-10-29T01:47:05Z")

</div>

Hi, I am looking for a case of the Pi 5 B 8G. Thinking of the KKSB Case for Raspberry Pi 5 and M.2 NVMe HAT. Does the AI HAT+ 26 TOPS fit with the Active Cooler when using this case and is there a slot for a camera ribbo…

---

## [WS-24659 with ROS2 on Raspberry Pi 5](https://forum.core-electronics.com.au/t/ws-24659-with-ros2-on-raspberry-pi-5/24416)

<div class="topic-metadata">

**Author:** [@Aaron268548](https://forum.core-electronics.com.au/u/Aaron268548)\
**Replies:** 4\
**Last updated:** [4 September 2026 07:19 UTC](https://forum.core-electronics.com.au/t/ws-24659-with-ros2-on-raspberry-pi-5/24416 "2026-09-04T07:19:35Z")

</div>

I was connecting the LIDAR WS-24659 to the test bed, and found that it would boot up and flood the TX/RX channels and stop ROS2 had a chance to complete its boot up sequence on the Pi5 Driving the project. On the test b…

---

## [Birdnet not installing on raspberry pi](https://forum.core-electronics.com.au/t/birdnet-not-installing-on-raspberry-pi/24407)

<div class="topic-metadata">

**Author:** [@Kathryn328968](https://forum.core-electronics.com.au/u/Kathryn328968)\
**Replies:** 2\
**Last updated:** [31 August 2026 23:34 UTC](https://forum.core-electronics.com.au/t/birdnet-not-installing-on-raspberry-pi/24407 "2026-08-31T23:34:08Z")

</div>

Hi I recently needed to upgrade my old birdnet solution and purchased new Raspberry Pi 5 hardware. I am following the guide here (noting the guide is for Raspberry Pi 4B) : Identify Birds through Sound with a Raspberry …

---

## [7" TFT screen parts needed](https://forum.core-electronics.com.au/t/7-tft-screen-parts-needed/9431)

<div class="topic-metadata">

**Author:** [@Peter154582](https://forum.core-electronics.com.au/u/Peter154582)\
**Replies:** 15\
**Last updated:** [28 August 2026 00:29 UTC](https://forum.core-electronics.com.au/t/7-tft-screen-parts-needed/9431 "2026-08-28T00:29:30Z")

</div>

I managed to ruin the white ribbon cable that connects the screen to the RPi board. I want a replacement. The same TFT screen originally came with 4 different colour cables that make connections with the RPi. I want t…

---

## [Raspberry Pi IQaudio DAC Pro \[PREORDER\] (CE07563)](https://forum.core-electronics.com.au/t/raspberry-pi-iqaudio-dac-pro-preorder-ce07563/9186)

<div class="topic-metadata">

**Author:** [@Core](https://forum.core-electronics.com.au/u/Core)\
**Replies:** 12\
**Last updated:** [14 August 2026 05:18 UTC](https://forum.core-electronics.com.au/t/raspberry-pi-iqaudio-dac-pro-preorder-ce07563/9186 "2026-08-14T05:18:51Z")

</div>

This is a placeholder topic for “Raspberry Pi IQaudio DAC Pro \[PREORDER\]” comments. IQaudio DAC Pro is Raspberry Pi’s highest-fidelity audio output HAT. It uses the Texas Instruments PCM5242 DAC to deliver outstanding…

---

## [Stuck getting AI Hat2+ working](https://forum.core-electronics.com.au/t/stuck-getting-ai-hat2-working/24320)

<div class="topic-metadata">

**Author:** [@Andrew41918](https://forum.core-electronics.com.au/u/Andrew41918)\
**Replies:** 11\
**Last updated:** [10 July 2026 07:56 UTC](https://forum.core-electronics.com.au/t/stuck-getting-ai-hat2-working/24320 "2026-07-10T07:56:09Z")

</div>

Ok folks, long story. Sorry. Just bought a Pi 5 8G, PSU, case AT-Hat2+, heat sink. In an attempt to get an AI LLM working. I’ve tried 3 sites now on how to get it working, but they all fail at the same point. sudo d…

---

## [RasPi AI HAT 2+ project](https://forum.core-electronics.com.au/t/raspi-ai-hat-2-project/24305)

<div class="topic-metadata">

**Author:** [@Andrew41918](https://forum.core-electronics.com.au/u/Andrew41918)\
**Replies:** 5\
**Last updated:** [1 July 2026 05:29 UTC](https://forum.core-electronics.com.au/t/raspi-ai-hat-2-project/24305 "2026-07-01T05:29:21Z")

</div>

Well, I’m bored and have a bit of cash to splash. LLMs seem interesting and I use one now and then when I get stuck with coding problems. I just watched Jaryd’s clip on them. The AI hats (It was Jaryd - yes?) Anyway…

---

## [Raspberry Pi+AI HAT+dual camera setup](https://forum.core-electronics.com.au/t/raspberry-pi-ai-hat-dual-camera-setup/24281)

<div class="topic-metadata">

**Author:** [@Rod75259](https://forum.core-electronics.com.au/u/Rod75259)\
**Replies:** 5\
**Last updated:** [18 June 2026 01:05 UTC](https://forum.core-electronics.com.au/t/raspberry-pi-ai-hat-dual-camera-setup/24281 "2026-06-18T01:05:23Z")

</div>

Hello, I am new to the Raspberry Pi world, and it seems through long research on Gemini and coding trials through Cursor, It’s a deep rabbit hole. I have already built an Edge AI fatigue monitoring system (FRMS) as a m…

---

## [Multiple I2C devices on a long bus](https://forum.core-electronics.com.au/t/multiple-i2c-devices-on-a-long-bus/24266)

<div class="topic-metadata">

**Author:** [@Rod321444](https://forum.core-electronics.com.au/u/Rod321444)\
**Replies:** 10\
**Last updated:** [12 June 2026 01:26 UTC](https://forum.core-electronics.com.au/t/multiple-i2c-devices-on-a-long-bus/24266 "2026-06-12T01:26:17Z")

</div>

I am hoping to set up a climate control for my greenhouse using Raspberry Pi 5 and I2C temperature and humidity sensors like DHT22. Minimum config will be to run the bus from the RPI-5 at the front of the greenhouse down…

---

## [Hailo-rpi5-examples/install.sh: C Compiler error](https://forum.core-electronics.com.au/t/hailo-rpi5-examples-install-sh-c-compiler-error/24264)

<div class="topic-metadata">

**Author:** [@kevin321394](https://forum.core-electronics.com.au/u/kevin321394)\
**Replies:** 1\
**Last updated:** [4 June 2026 00:38 UTC](https://forum.core-electronics.com.au/t/hailo-rpi5-examples-install-sh-c-compiler-error/24264 "2026-06-04T00:38:37Z")

</div>

I’ve followed your instruction from the guide - https://core-electronics.com.au/guides/yolo-object-detection-on-the-raspberry-pi-ai-hat-writing-custom-python/ and receive the following C compiler error. What is wro…

---

## [Raspberry Pi geocache project \[Solved\]](https://forum.core-electronics.com.au/t/raspberry-pi-geocache-project-solved/24226)

<div class="topic-metadata">

**Author:** [@Jonas269239](https://forum.core-electronics.com.au/u/Jonas269239)\
**Replies:** 1\
**Last updated:** [22 May 2026 05:56 UTC](https://forum.core-electronics.com.au/t/raspberry-pi-geocache-project-solved/24226 "2026-05-22T05:56:04Z")

</div>

I am building a Raspberry Pi-based geocache system using a UPS HAT. The device will be installed in a remote outdoor location and left unattended for long periods (potentially months at a time). It will only be activated…

---

## [Headless Raspberry pi Zero 2 W not connecting to ssh](https://forum.core-electronics.com.au/t/headless-raspberry-pi-zero-2-w-not-connecting-to-ssh/24131)

<div class="topic-metadata">

**Author:** [@Brady317919](https://forum.core-electronics.com.au/u/Brady317919)\
**Replies:** 8\
**Last updated:** [14 May 2026 07:36 UTC](https://forum.core-electronics.com.au/t/headless-raspberry-pi-zero-2-w-not-connecting-to-ssh/24131 "2026-05-14T07:36:54Z")

</div>

Hi, I have been using a raspberry pi zero 2 w for a project, connecting to it with PuTTY on my computer. SSH has been working fine until recently, where PuTTY now says “host does not exist”. I tried to use an IP scanne…

---

## [Raspberry Pi 4 Model B 4GB \[PREORDER\] (CE06425)](https://forum.core-electronics.com.au/t/raspberry-pi-4-model-b-4gb-preorder-ce06425/5848)

<div class="topic-metadata">

**Author:** [@Core](https://forum.core-electronics.com.au/u/Core)\
**Replies:** 20\
**Last updated:** [7 May 2026 06:56 UTC](https://forum.core-electronics.com.au/t/raspberry-pi-4-model-b-4gb-preorder-ce06425/5848 "2026-05-07T06:56:51Z")

</div>

This is a placeholder topic for “Raspberry Pi 4 Model B 4GB” comments. The 4GB variant of the Raspberry Pi 4 Model B Read more

---

## [Zero 2w with older dependencies](https://forum.core-electronics.com.au/t/zero-2w-with-older-dependencies/24159)

<div class="topic-metadata">

**Author:** [@Maryanne313975](https://forum.core-electronics.com.au/u/Maryanne313975)\
**Replies:** 2\
**Last updated:** [5 May 2026 09:13 UTC](https://forum.core-electronics.com.au/t/zero-2w-with-older-dependencies/24159 "2026-05-05T09:13:42Z")

</div>

Hi, I’ve started on a project using ‘NathanBuildsDiy’ dronev2 from github. The project is older than i realised. Opencv and tflite/numpy gave errors when I installed them. Can anyone here tell me if it’s still possi…

---

## [I have a RPi 4B and wany to put an M.2 Hat on it](https://forum.core-electronics.com.au/t/i-have-a-rpi-4b-and-wany-to-put-an-m-2-hat-on-it/24101)

<div class="topic-metadata">

**Author:** [@Jeffrey273990](https://forum.core-electronics.com.au/u/Jeffrey273990)\
**Replies:** 2\
**Last updated:** [7 April 2026 09:48 UTC](https://forum.core-electronics.com.au/t/i-have-a-rpi-4b-and-wany-to-put-an-m-2-hat-on-it/24101 "2026-04-07T09:48:18Z")

</div>

It is not clear to me about which M.2 SSD Hat would work in the 4B. Most talk about the RPi 5. Can anyone clarify this for me?

---

## [How to accelerate YOLOE on Raspberry Pi 5 with AI Hat (13 TOPS)?](https://forum.core-electronics.com.au/t/how-to-accelerate-yoloe-on-raspberry-pi-5-with-ai-hat-13-tops/23355)

<div class="topic-metadata">

**Author:** [@Flavio303821](https://forum.core-electronics.com.au/u/Flavio303821)\
**Replies:** 12\
**Last updated:** [30 March 2026 23:14 UTC](https://forum.core-electronics.com.au/t/how-to-accelerate-yoloe-on-raspberry-pi-5-with-ai-hat-13-tops/23355 "2026-03-30T23:14:14Z")

</div>

Hi everyone, I’m working on a project with a Raspberry Pi 5 where I’m using YOLOE for real-time object detection. I also have an AI Hat (13 TOPS) hardware accelerator that I’d like to use to improve performance, but I’…

---

## [MacBook .mp3, and, https://connect.raspberrypi.com/devices](https://forum.core-electronics.com.au/t/macbook-mp3-and-https-connect-raspberrypi-com-devices/23970)

<div class="topic-metadata">

**Author:** [@Bill293536](https://forum.core-electronics.com.au/u/Bill293536)\
**Replies:** 29\
**Last updated:** [25 March 2026 23:24 UTC](https://forum.core-electronics.com.au/t/macbook-mp3-and-https-connect-raspberrypi-com-devices/23970 "2026-03-25T23:24:33Z")

</div>

Hi, I want to see how I move .mp3 on a MacBook to Raspberry Pi 5 connected by File:connect.raspberrypi.com/devices :slight\_smile: Bill

---

## [Pi Zero 2 W no I2C comms - What am I doing wrong?](https://forum.core-electronics.com.au/t/pi-zero-2-w-no-i2c-comms-what-am-i-doing-wrong/24074)

<div class="topic-metadata">

**Author:** [@Mark285907](https://forum.core-electronics.com.au/u/Mark285907)\
**Replies:** 3\
**Last updated:** [24 March 2026 22:50 UTC](https://forum.core-electronics.com.au/t/pi-zero-2-w-no-i2c-comms-what-am-i-doing-wrong/24074 "2026-03-24T22:50:43Z")

</div>

Hi all. I’m no doubt missing something fundamental here but I can’t see it. I have a Zero 2 W that I want to connect some Piicodev modules to. As a test I’m using the Piicodev RGB module. I’ve installed the unified P…

---

## [Access to rPi onboard I/O header](https://forum.core-electronics.com.au/t/access-to-rpi-onboard-i-o-header/24063)

<div class="topic-metadata">

**Author:** [@Bruce268220](https://forum.core-electronics.com.au/u/Bruce268220)\
**Replies:** 4\
**Last updated:** [22 March 2026 01:45 UTC](https://forum.core-electronics.com.au/t/access-to-rpi-onboard-i-o-header/24063 "2026-03-22T01:45:40Z")

</div>

Hello, I use a very old Linux based box for test drivers, it provides multiple buffered DIO to convenient screw terminals on the case. I want to replace it with something modern, and looking at rPi. However, access to th…

---

## [HELP...How to set up YOLO Computer Vision on a Raspberry Pi](https://forum.core-electronics.com.au/t/help-how-to-set-up-yolo-computer-vision-on-a-raspberry-pi/24012)

<div class="topic-metadata">

**Author:** [@Bill293536](https://forum.core-electronics.com.au/u/Bill293536)\
**Replies:** 4\
**Last updated:** [3 March 2026 13:43 UTC](https://forum.core-electronics.com.au/t/help-how-to-set-up-yolo-computer-vision-on-a-raspberry-pi/24012 "2026-03-03T13:43:09Z")

</div>

Setting up Picamera2 “First, let’s check what version of NumPy PiCamera2 is using. Open up a new terminal window (don’t close the old one), and punch in the following: python3 -c “import numpy; print(numpy.\_version\_)” “…

---

## [Wiznet Pico 2 PoE compatibility](https://forum.core-electronics.com.au/t/wiznet-pico-2-poe-compatibility/23999)

<div class="topic-metadata">

**Author:** [@Daniel207612](https://forum.core-electronics.com.au/u/Daniel207612)\
**Replies:** 3\
**Last updated:** [23 February 2026 05:12 UTC](https://forum.core-electronics.com.au/t/wiznet-pico-2-poe-compatibility/23999 "2026-02-23T05:12:51Z")

</div>

I’m looking at getting the WIZnet Pico 2 Ethernet board - but I need PoE. Are these two parts actually compatible?

---

## [Can a Raspberry Pi and Arducam stay inside a hot car?](https://forum.core-electronics.com.au/t/can-a-raspberry-pi-and-arducam-stay-inside-a-hot-car/23922)

<div class="topic-metadata">

**Author:** [@Joe312384](https://forum.core-electronics.com.au/u/Joe312384)\
**Replies:** 14\
**Last updated:** [9 February 2026 06:54 UTC](https://forum.core-electronics.com.au/t/can-a-raspberry-pi-and-arducam-stay-inside-a-hot-car/23922 "2026-02-09T06:54:12Z")

</div>

My project revolves around a raspberry pi with the Arducam that will be inside my car. I was wondering if left inside a hot car can this damage the components?

---

## [Car chargers for Raspberry pi](https://forum.core-electronics.com.au/t/car-chargers-for-raspberry-pi/23925)

<div class="topic-metadata">

**Author:** [@Joe312384](https://forum.core-electronics.com.au/u/Joe312384)\
**Replies:** 4\
**Last updated:** [8 February 2026 22:32 UTC](https://forum.core-electronics.com.au/t/car-chargers-for-raspberry-pi/23925 "2026-02-08T22:32:29Z")

</div>

Just wondering what car charger should I buy that can supply the right amount of power to a raspberry pi, can anyone provide me a link to this?

---

## [Looking to buy a low lighting camera for raspberry pi](https://forum.core-electronics.com.au/t/looking-to-buy-a-low-lighting-camera-for-raspberry-pi/23914)

<div class="topic-metadata">

**Author:** [@Joe312384](https://forum.core-electronics.com.au/u/Joe312384)\
**Replies:** 5\
**Last updated:** [5 February 2026 06:48 UTC](https://forum.core-electronics.com.au/t/looking-to-buy-a-low-lighting-camera-for-raspberry-pi/23914 "2026-02-05T06:48:21Z")

</div>

I am looking for a good quality camera that is good with low light vision, particularly at night times with street lights. I heard that Arducam can be good at this. Can anyone suggest a particular model along with perip…

---

## [Raspi zero2w, usb and i2s audio noise issues](https://forum.core-electronics.com.au/t/raspi-zero2w-usb-and-i2s-audio-noise-issues/23897)

<div class="topic-metadata">

**Author:** [@Radio312191](https://forum.core-electronics.com.au/u/Radio312191)\
**Replies:** 16\
**Last updated:** [3 February 2026 00:40 UTC](https://forum.core-electronics.com.au/t/raspi-zero2w-usb-and-i2s-audio-noise-issues/23897 "2026-02-03T00:40:26Z")

</div>

@Pixmusix I came across your reply to Joseph saying “I’ve been playing around with audio on embedded systems this year and It can be done! It has been finicky; but it is possible to achieve good results” Can you tell me …

---

## [Using Pico W in a metal case. How to provide connection?](https://forum.core-electronics.com.au/t/using-pico-w-in-a-metal-case-how-to-provide-connection/23838)

<div class="topic-metadata">

**Author:** [@Oleksii311376](https://forum.core-electronics.com.au/u/Oleksii311376)\
**Replies:** 4\
**Last updated:** [21 January 2026 14:55 UTC](https://forum.core-electronics.com.au/t/using-pico-w-in-a-metal-case-how-to-provide-connection/23838 "2026-01-21T14:55:34Z")

</div>

Hello, World! This is my first post on the forum, and also I’m not experienced engineer. So, I’m building a wireless button. The idea is simple: Pico acts as HID-device and sends some key-presses. I need it to be packed…

[Next page](https://forum.core-electronics.com.au/c/general/raspberry-pi-australia/13.md?page=1)
