# 10k Slide Potentiometer (CE08556)

**URL:** <https://forum.core-electronics.com.au/t/10k-slide-potentiometer-ce08556/20176>\
**Category:** Product Questions\
**Created:** [10 June 2024 13:16 UTC](https://forum.core-electronics.com.au/t/10k-slide-potentiometer-ce08556/20176 "2024-06-10T13:16:23Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Core](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/core/32/57_2.png) [@Core](https://forum.core-electronics.com.au/u/Core)\
**Post date:** [10 June 2024 13:16 UTC](https://forum.core-electronics.com.au/t/10k-slide-potentiometer-ce08556/20176/1 "2024-06-10T13:16:23Z")

</div>

This is a placeholder topic for [**“10k Slide Potentiometer”**](https://core-electronics.com.au/10k-slide-potentiometer.html) comments.

![](https://core-electronics.com.au/media/catalog/product/cache/5ba536955e3e815f4e908e49c1dd8155/C/E/CE08556-1.jpg)

A 10k Potentiometer perfect for adding and visualising an input to your projects

[**Read more**](https://core-electronics.com.au/10k-slide-potentiometer.html)

---

<div class="post-metadata">

**Author:** ![Jenna273150](https://avatars.discourse-cdn.com/v4/letter/j/ebca7d/32.png) [@Jenna273150](https://forum.core-electronics.com.au/u/Jenna273150)\
**Post date:** [10 June 2024 13:16 UTC](https://forum.core-electronics.com.au/t/10k-slide-potentiometer-ce08556/20176/2 "2024-06-10T13:16:24Z")

</div>

Hi, I’m a newbie working on an arduino audio mixer slide fader, does this linear potentiometer work with Arduino?

---

<div class="post-metadata">

**Author:** ![Pixmusix](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/pixmusix/32/9719_2.png) [@Pixmusix](https://forum.core-electronics.com.au/u/Pixmusix)\
**Post date:** [11 June 2024 00:40 UTC](https://forum.core-electronics.com.au/t/10k-slide-potentiometer-ce08556/20176/3 "2024-06-11T00:40:20Z")

</div>

Hi @Jenna273150  
Welcome to the forums.

Yeah it will work 🙂  
You can hook pin #2 of the slider to an analogue pin of your arduino and use the `analogRead()` method to pull a 12 bit integer (0 - 4095) which will represent it’s position.

![image](https://canada1.discourse-cdn.com/flex028/uploads/core_electronics/original/2X/d/d31dade532be4c5a354fb7fde6684e13a66edf53.png)

I found this image for you. Note that the pins can be in different locations on different sliders.

 ![b88e5796b4d2ad2b82d22fb64ee369861e113cb9](https://canada1.discourse-cdn.com/flex028/uploads/core_electronics/original/2X/9/9f3ed6490e7f178d61622c8ff2b067492d28e422.png)

Quick thoughts.

When choosing a slider, have a think about how you would mount it.

You might also like to think about it’s [_taper_](https://eepower.com/resistor-guide/resistor-types/potentiometer-taper/#) **but** I think you will prefer to adjust for this in your Arduino code towards the end of your project.

Sounds cool.  
Show and tell the mixer when it’s done.  
Pix ❣
