# 2-Pin Female JST XH-Style Cable (15cm) (POLOLU-1164)

**URL:** <https://forum.core-electronics.com.au/t/2-pin-female-jst-xh-style-cable-15cm-pololu-1164/10304>\
**Category:** Pololu\
**Created:** [31 May 2021 03:43 UTC](https://forum.core-electronics.com.au/t/2-pin-female-jst-xh-style-cable-15cm-pololu-1164/10304 "2021-05-31T03:43:33Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Core](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/core/32/57_2.png) [@Core](https://forum.core-electronics.com.au/u/Core)\
**Post date:** [31 May 2021 03:43 UTC](https://forum.core-electronics.com.au/t/2-pin-female-jst-xh-style-cable-15cm-pololu-1164/10304/1 "2021-05-31T03:43:33Z")

</div>

This is a placeholder topic for [**“2-Pin Female JST XH-Style Cable (15cm)”**](http://core-electronics.com.au/catalog/product/view/sku/POLOLU-1164) comments.  
  
 ![](https://core-electronics.com.au/media/catalog/product//2/_/2_pin_female_jst_xh_style_cable __15cm___ pololu_1164__00.jpg)  
  
This 6" (15cm) cable has two 26AWG conductors with a 2.5mm-pitch 2-pin female JST XH-style connector. The spacing is very close to 0.1", which means this connector will work with 0.1" male header pins and standard perfboards and solderless breadboards. The other ends of the wires are unterminated; they can be cut to length to match your application. The red and black wires are twisted together to reduce noise.  
  
[**Read more**](http://core-electronics.com.au/catalog/product/view/sku/POLOLU-1164)

---

<div class="post-metadata">

**Author:** ![Simon164671](https://avatars.discourse-cdn.com/v4/letter/s/7bcc69/32.png) [@Simon164671](https://forum.core-electronics.com.au/u/Simon164671)\
**Post date:** [31 May 2021 03:43 UTC](https://forum.core-electronics.com.au/t/2-pin-female-jst-xh-style-cable-15cm-pololu-1164/10304/2 "2021-05-31T03:43:34Z")

</div>

Is it possible to get a bunch of the connectors (just the female part) and the crimps? I’m wanting to use colour coded cables in a project and would like for the cables to go from the switch to the board.

---

<div class="post-metadata">

**Author:** ![Jeff105671](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/jeff105671/32/3729_2.png) [@Jeff105671](https://forum.core-electronics.com.au/u/Jeff105671)\
**Post date:** [31 May 2021 03:52 UTC](https://forum.core-electronics.com.au/t/2-pin-female-jst-xh-style-cable-15cm-pololu-1164/10304/3 "2021-05-31T03:52:55Z")

</div>

This should do the job:

> **[JST connector Kit (2.54mm)](https://core-electronics.com.au/jst-connector-kit-2-54mm.html)**
>
> This kit includes JST XHP-2, XHP-3 and XHP-4 housing (20 units each), through-hole type shrouded header (20 units each) and crimp contact (100 units).