# 5V 4 Channel Relay Module 10A

**URL:** <https://forum.core-electronics.com.au/t/5v-4-channel-relay-module-10a/5941>\
**Category:** Uncategorized\
**Created:** [24 July 2019 04:30 UTC](https://forum.core-electronics.com.au/t/5v-4-channel-relay-module-10a/5941 "2019-07-24T04:30:22Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ray88270](https://avatars.discourse-cdn.com/v4/letter/r/ebca7d/32.png) [@Ray88270](https://forum.core-electronics.com.au/u/Ray88270)\
**Post date:** [24 July 2019 04:30 UTC](https://forum.core-electronics.com.au/t/5v-4-channel-relay-module-10a/5941/1 "2019-07-24T04:30:22Z")

</div>

Is it possible to switch 5V 4 Channel Relay Module from Raspberry Pi?

---

<div class="post-metadata">

**Author:** ![Robin57159](https://avatars.discourse-cdn.com/v4/letter/r/cc9497/32.png) [@Robin57159](https://forum.core-electronics.com.au/u/Robin57159)\
**Post date:** [24 July 2019 12:36 UTC](https://forum.core-electronics.com.au/t/5v-4-channel-relay-module-10a/5941/2 "2019-07-24T12:36:23Z")

</div>

Please read the tutorial

> **[Logic Level Converters for Raspberry Pi - Tutorial](https://core-electronics.com.au/tutorials/logic-level-converters-for-raspberry-pi.html)**
>
> So you’ve got your Raspberry Pi, you’ve got your sensors and external components and you’re ready to build a world-conquering robot beyond compare. But hang on a minute, the sensor you have only operates on 5V and you vaguely recall that using 5V...

---

<div class="post-metadata">

**Author:** ![Shaun21504](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/shaun21504/32/8473_2.png) [@Shaun21504](https://forum.core-electronics.com.au/u/Shaun21504)\
**Post date:** [24 July 2019 12:47 UTC](https://forum.core-electronics.com.au/t/5v-4-channel-relay-module-10a/5941/3 "2019-07-24T12:47:10Z")

</div>

Yes. Here’s the instructions on how to do it.

> **[Raspberry Pi: Control Relay switch via GPIO](https://tutorials-raspberrypi.com/raspberry-pi-control-relay-switch-via-gpio/)**
>
> Often you want to control modules with a higher voltage with the Raspberry Pi. For this purpose, relays can be used on the Raspberry Pi: The relay “switch” is utilized by means of a low-voltage pulse. Since the Pi only tolerates a maximum of 5V (the...