# Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit (ADA2348) **URL:** \ **Category:** Adafruit\ **Created:** [3 January 2022 07:39 UTC](https://forum.core-electronics.com.au/t/adafruit-dc-stepper-motor-hat-for-raspberry-pi-mini-kit-ada2348/12650 "2022-01-03T07:39:10Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![Core](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/core/32/57_2.png) [@Core](https://forum.core-electronics.com.au/u/Core)\ **Post date:** [3 January 2022 07:39 UTC](https://forum.core-electronics.com.au/t/adafruit-dc-stepper-motor-hat-for-raspberry-pi-mini-kit-ada2348/12650/1 "2022-01-03T07:39:10Z")
This is a placeholder topic for [**“Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit”**](http://core-electronics.com.au/catalog/product/view/sku/ADA2348) comments. ![](https://core-electronics.com.au/media/catalog/product//2/3/2348-01.jpg) Let your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up … read more [**Read more**](http://core-electronics.com.au/catalog/product/view/sku/ADA2348) ---
**Author:** ![Jeffrey6126](https://avatars.discourse-cdn.com/v4/letter/j/a9adbd/32.png) [@Jeffrey6126](https://forum.core-electronics.com.au/u/Jeffrey6126)\ **Post date:** [3 January 2022 07:39 UTC](https://forum.core-electronics.com.au/t/adafruit-dc-stepper-motor-hat-for-raspberry-pi-mini-kit-ada2348/12650/2 "2022-01-03T07:39:11Z")
Is there an option to make this board connector stackable (to control more than 4 motors)? ---
**Author:** ![Oliver33](https://avatars.discourse-cdn.com/v4/letter/o/a9adbd/32.png) [@Oliver33](https://forum.core-electronics.com.au/u/Oliver33)\ **Post date:** [3 January 2022 07:50 UTC](https://forum.core-electronics.com.au/t/adafruit-dc-stepper-motor-hat-for-raspberry-pi-mini-kit-ada2348/12650/3 "2022-01-03T07:50:18Z")
Sounds like it! > [@Product description](#): > > In fact, **you can even stack multiple Motor HATs** , up to 32 of them, for controlling up to 64 stepper motors or 128 DC motors (or a mix of the two) - just remember to purchase and solder in a stacking header instead of the one Adafruit include. ---
**Author:** ![Liam120347](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/liam120347/32/5003_2.png) [@Liam120347](https://forum.core-electronics.com.au/u/Liam120347)\ **Post date:** [3 January 2022 08:28 UTC](https://forum.core-electronics.com.au/t/adafruit-dc-stepper-motor-hat-for-raspberry-pi-mini-kit-ada2348/12650/4 "2022-01-03T08:28:26Z")
Hi Jeffery, To add to Oliver33’s response you’ll also have to link some solder bridges to change the I2C address, check out the docs: [Stacking HATs | Adafruit DC and Stepper Motor HAT for Raspberry Pi | Adafruit Learning System](https://learn.adafruit.com/adafruit-dc-and-stepper-motor-hat-for-raspberry-pi/stacking-hats) ---
**Author:** ![Jeffrey6126](https://avatars.discourse-cdn.com/v4/letter/j/a9adbd/32.png) [@Jeffrey6126](https://forum.core-electronics.com.au/u/Jeffrey6126)\ **Post date:** [3 January 2022 09:37 UTC](https://forum.core-electronics.com.au/t/adafruit-dc-stepper-motor-hat-for-raspberry-pi-mini-kit-ada2348/12650/5 "2022-01-03T09:37:46Z")
My point was you already include a 2 x 20 pin riser (ADA 4079 - $3.95) and then suggest we add a second connector (ADA 2223 - $4.95). I’m suggesting you add an option to swap one out for the other and pay the difference and not be left with an unused connector! ---
**Author:** ![Oliver33](https://avatars.discourse-cdn.com/v4/letter/o/a9adbd/32.png) [@Oliver33](https://forum.core-electronics.com.au/u/Oliver33)\ **Post date:** [3 January 2022 11:15 UTC](https://forum.core-electronics.com.au/t/adafruit-dc-stepper-motor-hat-for-raspberry-pi-mini-kit-ada2348/12650/6 "2022-01-03T11:15:49Z")
I think you’re confused I don’t work at Core, I was just helping out. Also, it’s an Adafruit product so you’d be best off getting in touch with them: [Adafruit.com](http://Adafruit.com) - they’ll be the ones sealing them up and shipping them with the non-stackable headers