# Adafruit ESP32-S3 TFT Feather - 4MB Flash, 2MB PSRAM, STEMMA QT (ADA5483)
**URL:** https://forum.core-electronics.com.au/t/adafruit-esp32-s3-tft-feather-4mb-flash-2mb-psram-stemma-qt-ada5483/14796
**Category:** Product Questions
**Created:** [8 August 2022 08:10 UTC](https://forum.core-electronics.com.au/t/adafruit-esp32-s3-tft-feather-4mb-flash-2mb-psram-stemma-qt-ada5483/14796 "2022-08-08T08:10:46Z")
**Posts on this page:** 7
**Page:** 1
### Author:  [@Core](https://forum.core-electronics.com.au/u/Core)
#### Post date: [8 August 2022 08:10 UTC](https://forum.core-electronics.com.au/t/adafruit-esp32-s3-tft-feather-4mb-flash-2mb-psram-stemma-qt-ada5483/14796/1 "2022-08-08T08:10:46Z")
This is a placeholder topic for [**“Adafruit ESP32-S3 TFT Feather - 4MB Flash, 2MB PSRAM, STEMMA QT”**](https://core-electronics.com.au/adafruit-esp32-s3-tft-feather-4mb-flash-2mb-psram-stemma-qt.html) comments.
We've got a new machine here at Adafruit, it can uncover your deepest desires. Don't believe me? I'll turn it on right now to prove it to you!..
[**Read more**](https://core-electronics.com.au/adafruit-esp32-s3-tft-feather-4mb-flash-2mb-psram-stemma-qt.html)
---
### Author:  [@Sebastian197459](https://forum.core-electronics.com.au/u/Sebastian197459)
#### Post date: [8 August 2022 08:10 UTC](https://forum.core-electronics.com.au/t/adafruit-esp32-s3-tft-feather-4mb-flash-2mb-psram-stemma-qt-ada5483/14796/2 "2022-08-08T08:10:47Z")
Really powerful microcontroller for the price, as always, Adafruit documentation makes life easy.
---
### Author:  [@Bryce](https://forum.core-electronics.com.au/u/Bryce)
#### Post date: [2 September 2022 06:22 UTC](https://forum.core-electronics.com.au/t/adafruit-esp32-s3-tft-feather-4mb-flash-2mb-psram-stemma-qt-ada5483/14796/3 "2022-09-02T06:22:10Z")
Hey Sebastian,
Welcome to the forum. Thanks for posting, if anyone has questions about the Feather feel free to add them here.
---
### Author:  [@Luke199659](https://forum.core-electronics.com.au/u/Luke199659)
#### Post date: [26 February 2023 05:24 UTC](https://forum.core-electronics.com.au/t/adafruit-esp32-s3-tft-feather-4mb-flash-2mb-psram-stemma-qt-ada5483/14796/4 "2023-02-26T05:24:50Z")
Does Core electronics have a suitable programmer for the ESP32-S3?
---
### Author:  [@Liam120347](https://forum.core-electronics.com.au/u/Liam120347)
#### Post date: [26 February 2023 05:58 UTC](https://forum.core-electronics.com.au/t/adafruit-esp32-s3-tft-feather-4mb-flash-2mb-psram-stemma-qt-ada5483/14796/5 "2023-02-26T05:58:40Z")
Hi Luke,
The S3 has a built in USB to UART programmer, or you could use an external one such as a CP210x or ESP-PROG.
---
### Author:  [@Luke199659](https://forum.core-electronics.com.au/u/Luke199659)
#### Post date: [28 February 2023 09:28 UTC](https://forum.core-electronics.com.au/t/adafruit-esp32-s3-tft-feather-4mb-flash-2mb-psram-stemma-qt-ada5483/14796/6 "2023-02-28T09:28:20Z")
Hi Liam, thanks for that info. Yes, to give some context, I was quite successfully using the built in programmer (with the arduino IDE), but it just stopped working out of the blue (maybe performed 30+ sketch uploads this way). I tried resetting the firmware to factory settings etc, but havn’t had any luck so far.
Strangely enough, (or maybe not strange at all!) the circuitPython firmware still works fine on it, but of course this uploads just like a USB flash drive (rather than using the internal programmer i assume?).
Anyway, my thoughts were that I still may be able to write to it with the arduino IDE using a programmer. I have some USBasp programmers, but apparently they’re not compatible with the ESP32-S3.
Nonetheless, I’ll check out your recommendations. Thanks again!
---
### Author:  [@Luke199659](https://forum.core-electronics.com.au/u/Luke199659)
#### Post date: [28 February 2023 10:58 UTC](https://forum.core-electronics.com.au/t/adafruit-esp32-s3-tft-feather-4mb-flash-2mb-psram-stemma-qt-ada5483/14796/7 "2023-02-28T10:58:27Z")
Just a quick update.
I was able to successfully upload a sketch using Arduino Cloud with the online IDE.
After this success, I tried to use the standard Arduino IDE and can now upload sketches again.
Unusual circumstances, but happy it’s resolved 🙂