# Adjustable Switching Power Supply Module IN 4V-35V OUT 1.5V-30V LM2596S (018-LM2596S)

**URL:** <https://forum.core-electronics.com.au/t/adjustable-switching-power-supply-module-in-4v-35v-out-1-5v-30v-lm2596s-018-lm2596s/556>\
**Category:** Product Questions\
**Created:** [29 November 2016 00:21 UTC](https://forum.core-electronics.com.au/t/adjustable-switching-power-supply-module-in-4v-35v-out-1-5v-30v-lm2596s-018-lm2596s/556 "2016-11-29T00:21:47Z")\
**Posts on this page:** 17\
**Page:** 1

<div class="post-metadata">

**Author:** ![Core](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/core/32/57_2.png) [@Core](https://forum.core-electronics.com.au/u/Core)\
**Post date:** [29 November 2016 00:21 UTC](https://forum.core-electronics.com.au/t/adjustable-switching-power-supply-module-in-4v-35v-out-1-5v-30v-lm2596s-018-lm2596s/556/1 "2016-11-29T00:21:47Z")

</div>

This is a placeholder topic for [**“Adjustable Switching Power Supply Module IN 4V-35V OUT 1.5V-30V LM2596S”**](http://core-electronics.com.au/catalog/product/view/sku/018-LM2596S) comments.

 ![](https://canada1.discourse-cdn.com/flex028/uploads/core_electronics/original/1X/3dd18c631c00edba26f4fd842521b210cf123841.jpg)  
  
A versatile power supply DC-DC converter module that offers a wide range for both input voltage (4V-35V) and output voltage (1.23V-30V). Tabs on each side allow for the input / output leads to be easily soldered on.  
  
[**Read more**](http://core-electronics.com.au/catalog/product/view/sku/018-LM2596S)

---

<div class="post-metadata">

**Author:** ![Ben11480](https://avatars.discourse-cdn.com/v4/letter/b/f04885/32.png) [@Ben11480](https://forum.core-electronics.com.au/u/Ben11480)\
**Post date:** [29 November 2016 00:21 UTC](https://forum.core-electronics.com.au/t/adjustable-switching-power-supply-module-in-4v-35v-out-1-5v-30v-lm2596s-018-lm2596s/556/2 "2016-11-29T00:21:47Z")

</div>

A practical board that has many uses, seems to be of good quality but i have only run it for about 100 hours so far. Make sure you set the required voltage before use.

---

<div class="post-metadata">

**Author:** ![Graham](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/graham/32/54_2.png) [@Graham](https://forum.core-electronics.com.au/u/Graham)\
**Post date:** [29 November 2016 00:27 UTC](https://forum.core-electronics.com.au/t/adjustable-switching-power-supply-module-in-4v-35v-out-1-5v-30v-lm2596s-018-lm2596s/556/3 "2016-11-29T00:27:55Z")

</div>

Thanks Ben! Do you have this device operating close to its limits or just humming away with some light duty work?

---

<div class="post-metadata">

**Author:** ![Gareth60247](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/gareth60247/32/1332_2.png) [@Gareth60247](https://forum.core-electronics.com.au/u/Gareth60247)\
**Post date:** [14 October 2018 05:21 UTC](https://forum.core-electronics.com.au/t/adjustable-switching-power-supply-module-in-4v-35v-out-1-5v-30v-lm2596s-018-lm2596s/556/4 "2018-10-14T05:21:07Z")

</div>

Hi, should this be adjustable via the potentiometer? I have two and both have a fixed output voltage regardless of turning the screw.

---

<div class="post-metadata">

**Author:** ![Stephen](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/stephen/32/1599_2.png) [@Stephen](https://forum.core-electronics.com.au/u/Stephen)\
**Post date:** [15 October 2018 02:24 UTC](https://forum.core-electronics.com.au/t/adjustable-switching-power-supply-module-in-4v-35v-out-1-5v-30v-lm2596s-018-lm2596s/556/5 "2018-10-15T02:24:16Z")

</div>

Hi Gareth,

Yes they should adjust by turning the screw on the trim pot. These should take 20 turns to adjust from one end of the range to the other.

---

<div class="post-metadata">

**Author:** ![Gareth60247](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/gareth60247/32/1332_2.png) [@Gareth60247](https://forum.core-electronics.com.au/u/Gareth60247)\
**Post date:** [27 October 2018 04:38 UTC](https://forum.core-electronics.com.au/t/adjustable-switching-power-supply-module-in-4v-35v-out-1-5v-30v-lm2596s-018-lm2596s/556/6 "2018-10-27T04:38:39Z")

</div>

OK, working great. There seems to be a bit of a dead zone in adjusting them but otherwise working great. More stable than the powered USB hub I have (which makes me disappointed in the hub purchase :P).

---

<div class="post-metadata">

**Author:** ![Tom153089](https://avatars.discourse-cdn.com/v4/letter/t/a9a28c/32.png) [@Tom153089](https://forum.core-electronics.com.au/u/Tom153089)\
**Post date:** [1 February 2021 10:32 UTC](https://forum.core-electronics.com.au/t/adjustable-switching-power-supply-module-in-4v-35v-out-1-5v-30v-lm2596s-018-lm2596s/556/7 "2021-02-01T10:32:36Z")

</div>

Will this convert a 24v source to correctly power a raspberry pi 4? Thanks.

---

<div class="post-metadata">

**Author:** ![Liam](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/liam/32/3562_2.png) [@Liam](https://forum.core-electronics.com.au/u/Liam)\
**Post date:** [2 February 2021 02:45 UTC](https://forum.core-electronics.com.au/t/adjustable-switching-power-supply-module-in-4v-35v-out-1-5v-30v-lm2596s-018-lm2596s/556/8 "2021-02-02T02:45:14Z")

</div>

Hey Tom,

Welcome to the forum!

This regulator will be able to power the Pi. Out of the box, you won’t be able to plug it straight in. Using a multimeter to read the voltage and ensure that it is within the input range of the Pi 4’s [USB power input](https://thepihut.com/blogs/raspberry-pi-tutorials/how-do-i-power-my-raspberry-pi) and [GPIO Power](https://raspberrypi.stackexchange.com/questions/1617/how-do-i-supply-power-through-the-gpio).

If you have any other questions let us know!

Liam.

---

<div class="post-metadata">

**Author:** ![Tim5919](https://avatars.discourse-cdn.com/v4/letter/t/e19adc/32.png) [@Tim5919](https://forum.core-electronics.com.au/u/Tim5919)\
**Post date:** [15 October 2021 11:21 UTC](https://forum.core-electronics.com.au/t/adjustable-switching-power-supply-module-in-4v-35v-out-1-5v-30v-lm2596s-018-lm2596s/556/9 "2021-10-15T11:21:22Z")

</div>

Have to say these little PSUs are an absolute weapon. For the price, recommend having a few in the back pocket for rapid prototyping.

They have enough voltage flexibility and current to power most projects, at least until you can find a more suitable static supply.

---

<div class="post-metadata">

**Author:** ![Gerard163258](https://avatars.discourse-cdn.com/v4/letter/g/a5b964/32.png) [@Gerard163258](https://forum.core-electronics.com.au/u/Gerard163258)\
**Post date:** [27 January 2022 03:44 UTC](https://forum.core-electronics.com.au/t/adjustable-switching-power-supply-module-in-4v-35v-out-1-5v-30v-lm2596s-018-lm2596s/556/10 "2022-01-27T03:44:12Z")

</div>

Something weird with the ones I just got from Core.

My bench supply is 13.3V DC into the module. The output sits at 12.03V and will not adjust. I can’t believe all of them are crook!

I presume the hookup is pretty straightforward.

Any thoughts?

Gerard

---

<div class="post-metadata">

**Author:** ![James](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/james/32/4400_2.png) [@James](https://forum.core-electronics.com.au/u/James)\
**Post date:** [27 January 2022 04:02 UTC](https://forum.core-electronics.com.au/t/adjustable-switching-power-supply-module-in-4v-35v-out-1-5v-30v-lm2596s-018-lm2596s/556/11 "2022-01-27T04:02:02Z")

</div>

Hi Gerard,

As this converter cannot boost, and the adjustment pot acts over the whole range (1.5 - 30V), my bet is that you just haven’t turned it far enough.

Keep twisting, and you should see your output begin to drop at a certain point.

If it does turn out that you have some dead units, we’ll sort you out.

-James

---

<div class="post-metadata">

**Author:** ![Gerard163258](https://avatars.discourse-cdn.com/v4/letter/g/a5b964/32.png) [@Gerard163258](https://forum.core-electronics.com.au/u/Gerard163258)\
**Post date:** [27 January 2022 04:33 UTC](https://forum.core-electronics.com.au/t/adjustable-switching-power-supply-module-in-4v-35v-out-1-5v-30v-lm2596s-018-lm2596s/556/12 "2022-01-27T04:33:46Z")

</div>

Yep, you’re right on the money. Turning the pot CCW doesn’t do much initially then it drops off pretty nicely.

I already had a couple that I bought from ‘Dodgy Bros’ on eBay and one of them is definitely crook as in output=input. The other one is OK.

All the ones from you guys are 100%.

All’s well that ends well!

Gerard

---

<div class="post-metadata">

**Author:** ![Ben294086](https://avatars.discourse-cdn.com/v4/letter/b/7ba0ec/32.png) [@Ben294086](https://forum.core-electronics.com.au/u/Ben294086)\
**Post date:** [10 September 2025 04:29 UTC](https://forum.core-electronics.com.au/t/adjustable-switching-power-supply-module-in-4v-35v-out-1-5v-30v-lm2596s-018-lm2596s/556/13 "2025-09-10T04:29:36Z")

</div>

Hi Im Design a pcb and what to use a “Adjustable Switching Power Supply Module IN 4V-35V OUT 1.5V-30V LM2596S Step-Down Converter” as a soldered component but can’t find any data on the hole/pad location/spacing for the input and output to fit it to my own pcb

---

<div class="post-metadata">

**Author:** ![Jane](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/jane/32/12622_2.png) [@Jane](https://forum.core-electronics.com.au/u/Jane)\
**Post date:** [10 September 2025 05:18 UTC](https://forum.core-electronics.com.au/t/adjustable-switching-power-supply-module-in-4v-35v-out-1-5v-30v-lm2596s-018-lm2596s/556/14 "2025-09-10T05:18:55Z")

</div>

Hi @Ben294086 and welcome to the forum. Glad to have you here.

I grabbed one of the shelf to check and can confirm that our current batch conform to these measurements here:

 ![image](https://canada1.discourse-cdn.com/flex028/uploads/core_electronics/original/2X/c/ca0938615de0823eb44c447a3dd50240d66dff0e.png)

---

<div class="post-metadata">

**Author:** ![Rob296810](https://avatars.discourse-cdn.com/v4/letter/r/c77e96/32.png) [@Rob296810](https://forum.core-electronics.com.au/u/Rob296810)\
**Post date:** [21 December 2025 01:25 UTC](https://forum.core-electronics.com.au/t/adjustable-switching-power-supply-module-in-4v-35v-out-1-5v-30v-lm2596s-018-lm2596s/556/15 "2025-12-21T01:25:14Z")

</div>

Can you advise the headroom needed? Can i get a stable 5V from a 6V input?

---

<div class="post-metadata">

**Author:** ![Robert93820](https://avatars.discourse-cdn.com/v4/letter/r/ac91a4/32.png) [@Robert93820](https://forum.core-electronics.com.au/u/Robert93820)\
**Post date:** [21 December 2025 02:43 UTC](https://forum.core-electronics.com.au/t/adjustable-switching-power-supply-module-in-4v-35v-out-1-5v-30v-lm2596s-018-lm2596s/556/16 "2025-12-21T02:43:03Z")

</div>

Hi Rob  
The product text should say it all  
**Features:**

- Input voltage: 4V to 35V DC
- Output voltage: 1.23V to 30V

So to answer your question

> [@Rob296810](#):
>
> Can i get a stable 5V from a 6V input?

I would say NO.

It looks like the required headroom on the bottom of the range would be about 3.77V and about 5V at the high end..  
Cheers Bob

---

<div class="post-metadata">

**Author:** ![Rob296810](https://avatars.discourse-cdn.com/v4/letter/r/c77e96/32.png) [@Rob296810](https://forum.core-electronics.com.au/u/Rob296810)\
**Post date:** [21 December 2025 03:18 UTC](https://forum.core-electronics.com.au/t/adjustable-switching-power-supply-module-in-4v-35v-out-1-5v-30v-lm2596s-018-lm2596s/556/17 "2025-12-21T03:18:26Z")

</div>

Thank you!

Cheers
