# Arduino - custom build timer for Coffee grindee

**URL:** <https://forum.core-electronics.com.au/t/arduino-custom-build-timer-for-coffee-grindee/3741>\
**Category:** Arduino\
**Created:** [22 October 2018 04:46 UTC](https://forum.core-electronics.com.au/t/arduino-custom-build-timer-for-coffee-grindee/3741 "2018-10-22T04:46:03Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Olivier72689](https://avatars.discourse-cdn.com/v4/letter/o/9d8465/32.png) [@Olivier72689](https://forum.core-electronics.com.au/u/Olivier72689)\
**Post date:** [22 October 2018 04:46 UTC](https://forum.core-electronics.com.au/t/arduino-custom-build-timer-for-coffee-grindee/3741/1 "2018-10-22T04:46:03Z")

</div>

Hi all,

Project: Coffee grinder modifications - put a timer to grind specific amount of sec/ms

Sorry if the questions are a bit low key, and I hope my description give enough to start the discussion. I want to achieve this project, amazing idea/details of Arduino project:

I was on core website to buy the part (as in description/instructions):

> **[IIC LCD1602 (Gadgeteer Compatible)](https://core-electronics.com.au/iic-lcd1602-gadgeteer-compatible.html/)**
>
> This is another great LCD display compatible with Gadgeteer modules from DFRobot. With limited pin resources, your project will quicly run out of resources using normal LCDs. With this I2C interface LCD module, you only need 2 lines (I2C)to display...

  
But there is no stock (and manufacturer as well, I’ll suspect it’s not available anymore)

Is there a part I can easily change it into, please see the diagram, I want to plug and play, not redo the whole project: [https://imgur.com/IcadcP8](https://imgur.com/IcadcP8)

Substitution - other part

Is these LCD reference a proper substitute or are the connections completely different?

> **[Gravity: I2C LCD1602 Arduino LCD Display Module (Green)](https://core-electronics.com.au/gravity-i2c-lcd1602-arduino-lcd-display-module-green.html)**
>
> Referring to the LCD16020, I believe that everyone is not unfamiliar with the square shape, green color, a row of 2.54 pin header.... LCD1602 module is a product .. read more

Your substitute seem to use 4 pins (I2C ?) to communicate, but I expect a communication on 16 pins as per above schematic

The starting switch, colourful VS. meaningful

Another quick question, is there any difference if I change the push button to a simple one: [https://core-electronics.com.au/mini-push-button-switch-tall.html](https://core-electronics.com.au/mini-push-button-switch-tall.html) and this button, would it be available in a metalic “stick”:  
I want it long, and in metal to resist damage from use, then i want to place that button behind the holder (where the grinds get distribute), so it pushes as soon as you place the handle, don’t have to press somewhere, just place the handle

Can you help me?

Thank you very much

Olivier

---

<div class="post-metadata">

**Author:** ![Stephen](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/stephen/32/1599_2.png) [@Stephen](https://forum.core-electronics.com.au/u/Stephen)\
**Post date:** [23 October 2018 22:09 UTC](https://forum.core-electronics.com.au/t/arduino-custom-build-timer-for-coffee-grindee/3741/2 "2018-10-23T22:09:24Z")

</div>

Hi Oliver,

If you want an LCD that will work with the diagram you shared, then you just need a basic 16-character LCD like this:

> **[Basic 16x2 Character LCD - White on Black 5V](https://core-electronics.com.au/basic-16x2-character-lcd-white-on-black-5v.html)**
>
> This is a basic 16 character by 2 line display with a snazzy black background with white characters. Utilizes the extremely common HD44780 parallel interface chipset (datasheet). Interface code is freely available. You will need ~11 general I/O pins...

The I2C versions are made to connect using only two wires and power/ground. They don’t match up with the diagram that you shared. Even the IIC LCD1602 does not match the diagram.

The tall pushbutton is only available in plastic. If you are looking for a good switch to be activated by the handle you should consider a microswitch like this:

> **[Snap-Action Switch with 50mm Lever: 3-Pin, SPDT, 5A](https://core-electronics.com.au/snap-action-switch-with-50mm-lever-3-pin-spdt-5a.html)**
>
> This single-pole, double-throw (SPDT) momentary switch can be used as a general-purpose micro switch, but the long lever arm makes it especially useful as a tactile bump sensor for your robot (e.g whiskers or antennae). The switch body dimension is...

This one has a long lever, there are many different shapes and sizes.

Let me know what you think!
