# Argon ONE M.2 Case (CE07434)

**URL:** <https://forum.core-electronics.com.au/t/argon-one-m-2-case-ce07434/9083>\
**Category:** Product Questions\
**Created:** [31 December 2020 18:10 UTC](https://forum.core-electronics.com.au/t/argon-one-m-2-case-ce07434/9083 "2020-12-31T18:10:02Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![brian86770](https://avatars.discourse-cdn.com/v4/letter/b/c5a1d2/32.png) [@brian86770](https://forum.core-electronics.com.au/u/brian86770)\
**Post date:** [31 December 2020 19:27 UTC](https://forum.core-electronics.com.au/t/argon-one-m-2-case-ce07434/9083/3 "2020-12-31T19:27:11Z")

</div>

a few links that may help …below… and yes this is an excellent choice of case for the rpi-4 i would recommend it to any new user .

welcome to core forum…  
1: i don’t see the M-2 hdd can be accessed without taking the case open

2: i found the m-2 to be much faster than any sd-card  
…i had my m-2 running long before core started to sell the argon m-2 case.  
if you use a high speed ssd then i`m shore you will be way ahead of any sd-card even using usb 3  
i found my wd-green much faster than my sandisk ultra thumb sticks or ultra sd-cards…

3: see 2  
4: the remote control or infra red is a grey area not much is known i suggest you drop an email to the guy`s at argon.

[https://www.argon40.com/argon-one-m-2-case-for-raspberry-pi-4.html](https://www.argon40.com/argon-one-m-2-case-for-raspberry-pi-4.html)

> **[Argon40 Official Store](https://argon40.com/)**
>
> Argon40 Official Store the Raspberry Pi Products Portal in Asia

i like the full size hdmi outputs,very nice…very biasing,  
to setup the fan trip temperature points you can use this via a command prompt as root user…  
`argonone-config`  
or you can edit the `argononed.conf` file in the `/etc` directory manually

also look here if your unsure about the fan setup and testing it out

> [@Argon ONE Raspberry Pi 4 Case (CE06586)](https://forum.core-electronics.com.au/t/argon-one-raspberry-pi-4-case-ce06586/6806/35):
>
> FAN SETUP PROCEDURES AND TESTING:…this is for raspberry Debian tested on it… after assembly set the jumper to 1 and 2 for default setting or set it to 2 and 3 if you want the fan to run continuously if you use this option there is no need to install the program… so if you want software control then set the jumper to default 1 and 2… making shore you are connected to the internet download from argon the setup file to your directory of choice just click on the link it will start the d…

---

_[View the full topic](https://forum.core-electronics.com.au/t/argon-one-m-2-case-ce07434/9083)._