# Attaching Pi-Zero modules/hats to the RPi3B+

**URL:** <https://forum.core-electronics.com.au/t/attaching-pi-zero-modules-hats-to-the-rpi3b/2838>\
**Category:** Raspberry Pi\
**Created:** [3 June 2018 02:39 UTC](https://forum.core-electronics.com.au/t/attaching-pi-zero-modules-hats-to-the-rpi3b/2838 "2018-06-03T02:39:01Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![JeanLuc8011](https://avatars.discourse-cdn.com/v4/letter/j/8e8cbc/32.png) [@JeanLuc8011](https://forum.core-electronics.com.au/u/JeanLuc8011)\
**Post date:** [3 June 2018 02:39 UTC](https://forum.core-electronics.com.au/t/attaching-pi-zero-modules-hats-to-the-rpi3b/2838/1 "2018-06-03T02:39:01Z")

</div>

Hey all,

Has anyone been able to fit a PiZero HAT (eg. Envirophat) to the RPi3B+?

I am concerned whether or not the USB slots on the RPi3B+ will interfere with the direct connecting of it.  
I am confident that those modules will work on the RPi3B+, just making sure it will physically fit.

Thanks,

---

<div class="post-metadata">

**Author:** ![Michael57144](https://avatars.discourse-cdn.com/v4/letter/m/b19c9b/32.png) [@Michael57144](https://forum.core-electronics.com.au/u/Michael57144)\
**Post date:** [3 June 2018 04:41 UTC](https://forum.core-electronics.com.au/t/attaching-pi-zero-modules-hats-to-the-rpi3b/2838/2 "2018-06-03T04:41:39Z")

</div>

As long as the pHAT fits within the dimensions of the Pi0, the board should not touch the USB / ethernet sockets.