# Case for Raspberry Pi 3+ (Clear, Fan Cooled) (CE04434)
**URL:** https://forum.core-electronics.com.au/t/case-for-raspberry-pi-3-clear-fan-cooled-ce04434/4168
**Category:** Core Electronics
**Created:** [17 December 2018 10:36 UTC](https://forum.core-electronics.com.au/t/case-for-raspberry-pi-3-clear-fan-cooled-ce04434/4168 "2018-12-17T10:36:30Z")
**Posts on this page:** 8
**Page:** 1
### Author:  [@Core](https://forum.core-electronics.com.au/u/Core)
#### Post date: [17 December 2018 10:36 UTC](https://forum.core-electronics.com.au/t/case-for-raspberry-pi-3-clear-fan-cooled-ce04434/4168/1 "2018-12-17T10:36:30Z")
This is a placeholder topic for [**“Case for Raspberry Pi 3+ (Clear, Fan Cooled)”**](http://core-electronics.com.au/catalog/product/view/sku/CE04434) comments.
Keep your Pi cool with this semi-transparent case. It’s rounded edges and stylish design make it perfect for display as a media or games center, and the built in fan & vents ensure plenty of circulation.
[**Read more**](http://core-electronics.com.au/catalog/product/view/sku/CE04434)
---
### Author:  [@Andrew68766](https://forum.core-electronics.com.au/u/Andrew68766)
#### Post date: [17 December 2018 10:36 UTC](https://forum.core-electronics.com.au/t/case-for-raspberry-pi-3-clear-fan-cooled-ce04434/4168/2 "2018-12-17T10:36:31Z")
Are there assembly instructions anywhere?
---
### Author:  [@Stephen](https://forum.core-electronics.com.au/u/Stephen)
#### Post date: [17 December 2018 22:34 UTC](https://forum.core-electronics.com.au/t/case-for-raspberry-pi-3-clear-fan-cooled-ce04434/4168/3 "2018-12-17T22:34:36Z")
Hi Andrew,
There are no assembly instructions.
1.Using the four screws mount the fan on the upper lid of the case
2. Inert the Raspberry Pi into the lower half of the case. Angle it in, inserting the HDMI and Audio jacks in place first, then rotate the board down into place. If you try to press the board straight down the HDMI and Audio jacks will not line up.
3. Connect the fan
4. Snap the upper half of the case in place.
---
### Author:  [@Cameron77660](https://forum.core-electronics.com.au/u/Cameron77660)
#### Post date: [8 March 2019 00:14 UTC](https://forum.core-electronics.com.au/t/case-for-raspberry-pi-3-clear-fan-cooled-ce04434/4168/4 "2019-03-08T00:14:00Z")
Some would say it’s as easy as Pi…🙂
---
### Author:  [@Sean94366](https://forum.core-electronics.com.au/u/Sean94366)
#### Post date: [25 March 2020 01:55 UTC](https://forum.core-electronics.com.au/t/case-for-raspberry-pi-3-clear-fan-cooled-ce04434/4168/5 "2020-03-25T01:55:14Z")
Does this case have room to also fit heatsinks such as these:
> **[Heatsink kit for Raspberry Pi B+](https://core-electronics.com.au/heatsink-kit-for-raspberry-pi-b.html)**
>
> A kit of two 2 heatsinks for the Raspberry Pi main ICs. Now you can keep heat management under wraps for processor heavy recipes.
---
### Author:  [@Owen](https://forum.core-electronics.com.au/u/Owen)
#### Post date: [26 March 2020 00:24 UTC](https://forum.core-electronics.com.au/t/case-for-raspberry-pi-3-clear-fan-cooled-ce04434/4168/6 "2020-03-26T00:24:29Z")
Hey Sean,
That fan will fit over the CPU with any heatsink that’s 6mm or shorter!
Both of the heatsinks in that kit will fit in the case, as long as they are used in their relevant spots.The Pi doesn’t have too many heating issues, especially to the point where you need both passive and active cooling to solve it, so the addition of a heatsink might not even be necessary!
---
### Author:  [@Philipp109873](https://forum.core-electronics.com.au/u/Philipp109873)
#### Post date: [11 June 2020 10:39 UTC](https://forum.core-electronics.com.au/t/case-for-raspberry-pi-3-clear-fan-cooled-ce04434/4168/7 "2020-06-11T10:39:57Z")
The worst case I have ever used for my Raspberry Pi B 3 +. It just broke the bloody micro sd insert!
Never again will I purchase from this mob, either the inventors kit was poor quality as well!
---
### Author:  [@Bryce](https://forum.core-electronics.com.au/u/Bryce)
#### Post date: [15 June 2020 01:35 UTC](https://forum.core-electronics.com.au/t/case-for-raspberry-pi-3-clear-fan-cooled-ce04434/4168/8 "2020-06-15T01:35:21Z")
Hi Phillip,
Sorry to hear about the issues that occurred with the case and kit. If you could please send through an email to support@coreelectronics.com.au I’ll see what we can organise for you to sort this out. If there’s anything else that we can do for you please let me know.
Bryce
Core Electronics | Support