# Connecting relays to Pycom devices

**URL:** <https://forum.core-electronics.com.au/t/connecting-relays-to-pycom-devices/14312>\
**Category:** Support\
**Created:** [10 June 2022 01:19 UTC](https://forum.core-electronics.com.au/t/connecting-relays-to-pycom-devices/14312 "2022-06-10T01:19:51Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Liam120347](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/liam120347/32/5003_2.png) [@Liam120347](https://forum.core-electronics.com.au/u/Liam120347)\
**Post date:** [10 June 2022 11:25 UTC](https://forum.core-electronics.com.au/t/connecting-relays-to-pycom-devices/14312/2 "2022-06-10T11:25:03Z")

</div>

Hi Clint,

I’d take a look at this topic where I run through some code and calculations: [Asset Tracking device - #7 by Liam120347](https://forum.core-electronics.com.au/t/asset-tracking-device/11484/7)

I believe all of the Pycom devices use the same base microcontroller so it should transfer across their range.

---

_[View the full topic](https://forum.core-electronics.com.au/t/connecting-relays-to-pycom-devices/14312)._