# Custom trail cameras using Raspberry Pi

**URL:** <https://forum.core-electronics.com.au/t/custom-trail-cameras-using-raspberry-pi/18810>\
**Category:** Raspberry Pi\
**Created:** [19 December 2023 02:17 UTC](https://forum.core-electronics.com.au/t/custom-trail-cameras-using-raspberry-pi/18810 "2023-12-19T02:17:15Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![Liam](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/liam/32/3562_2.png) [@Liam](https://forum.core-electronics.com.au/u/Liam)\
**Post date:** [21 December 2023 04:51 UTC](https://forum.core-electronics.com.au/t/custom-trail-cameras-using-raspberry-pi/18810/4 "2023-12-21T04:51:42Z")

</div>

Hi Josh,

Definitely possible!  
I’d check out the following components, let us know if you have any alterations and we’ll see if we can find a more suitable part.

> **[Raspberry Pi Camera Board - Night Vision & Adjustable-Focus Lens (5MP)](https://core-electronics.com.au/raspberry-pi-camera-board-night-vision-adjustable-focus-lens-5mp.html)**
>
> This Raspberry Pi Camera can use 2 x 3W high-intensity IR LED spotlights for night time recording. It also has an adjustable 3.6mm focal length and…

> **[PIR Infrared Motion Sensor (HC-SR501)](https://core-electronics.com.au/modmypi-pir-infrared-motion-sensor-hc-sr501.html)**
>
> PIR sensors often referred to as, "Passive Infrared" or "IR motion" sensors, enable you to sense motion

> **[Waveshare 4G HAT for Raspberry Pi (LTE Cat-4/4G/3G/2G/GNSS)](https://core-electronics.com.au/waveshare-4g-hat-for-raspberry-pi-lte-cat-4-4g-3g-2g-gnss.html)**
>
> Enable LTE Cat-4 4G/3G/2G communication and GNSS Positioning for your Raspberry Pi

The battery is a bit tougher than the rest of the components, once you get your software working (possibly handling the power to the camera and 4G module) then you’ll be able to get a gauge on how much power you use.  
I’ve got one of these at home for super rough Pi power requirement setups but a power profiler or [Otii Arc](https://core-electronics.com.au/qoitech-otii-arc.html) would be better suited for measuring power consumption.  
Overkill mode might include a SLA battery and step down module to make sure its powered for as long as possible (if you leave the system on the battery might get damaged).

Just some options above to get you started!  
Liam

---

_[View the full topic](https://forum.core-electronics.com.au/t/custom-trail-cameras-using-raspberry-pi/18810)._
