# Data Logging with the Micro:bit and OpenLog

**URL:** <https://forum.core-electronics.com.au/t/data-logging-with-the-micro-bit-and-openlog/3086>\
**Category:** Guides\
**Created:** [11 July 2018 04:12 UTC](https://forum.core-electronics.com.au/t/data-logging-with-the-micro-bit-and-openlog/3086 "2018-07-11T04:12:59Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Stephen](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/stephen/32/1599_2.png) [@Stephen](https://forum.core-electronics.com.au/u/Stephen)\
**Post date:** [11 July 2018 04:13 UTC](https://forum.core-electronics.com.au/t/data-logging-with-the-micro-bit-and-openlog/3086/1 "2018-07-11T04:13:00Z")

</div>

Stephen just shared a new tutorial: [**"Data Logging with the Micro:bit and OpenLog"**](http://core-electronics.com.au/tutorials/data-logging-with-the-microbit-and-openlog.html)  
  
 ![](https://canada1.discourse-cdn.com/flex028/uploads/core_electronics/original/2X/3/3cbeedbc98704cd00077f6687015871f048a6941.png)  
  
The Micro:bit by BBC is a great data collection tool, it just needs a little help remembering what it has measured! This tutorial is made for those Micro:bit projects where transmitting your sensor data over radio or Bluetooth to a computer just won’t cut it…  
  
[**Read more**](http://core-electronics.com.au/tutorials/data-logging-with-the-microbit-and-openlog.html)

---

<div class="post-metadata">

**Author:** ![Andrew92028](https://avatars.discourse-cdn.com/v4/letter/a/e5b9ba/32.png) [@Andrew92028](https://forum.core-electronics.com.au/u/Andrew92028)\
**Post date:** [14 July 2019 04:03 UTC](https://forum.core-electronics.com.au/t/data-logging-with-the-micro-bit-and-openlog/3086/2 "2019-07-14T04:03:19Z")

</div>

OMG THANK YOU!! I have been bashing my head against a wall trying to figure out why the data I am logging in a similar set up is all gibberish. Turns out I had to change the baud rate on the SD card config file!! I would not have known that if it wasn’t for this video. I was ready to give up. Thank you again, regards Andrew.😃
