# DIY Storage System for Hardware

**URL:** <https://forum.core-electronics.com.au/t/diy-storage-system-for-hardware/10847>\
**Category:** Support\
**Created:** [29 July 2021 01:18 UTC](https://forum.core-electronics.com.au/t/diy-storage-system-for-hardware/10847 "2021-07-29T01:18:52Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Bailey170739](https://avatars.discourse-cdn.com/v4/letter/b/b2d939/32.png) [@Bailey170739](https://forum.core-electronics.com.au/u/Bailey170739)\
**Post date:** [29 July 2021 01:18 UTC](https://forum.core-electronics.com.au/t/diy-storage-system-for-hardware/10847/1 "2021-07-29T01:18:52Z")

</div>

Hi all

I am working on a new project and I have a couple of questions about how I should proceed and what I need to make it work.

Here is the project:  
I am designing a storage box system for different sized screws, nails, bolts, washers, etc. and I want an easy way to tell the amount of each size I have. I am thinking of using a small LED Display with 2 buttons, one to plus 1 to the amount and one to minus 1 from the amount. Probably powered by a raspberry pi or arduino.

I have no experience in electronics or coding, except for simply meddling with switches and buttons, and therefore have no idea what to use, where to start or anything like that. If you could help me out it would be much appreciated

---

<div class="post-metadata">

**Author:** ![James](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/james/32/4400_2.png) [@James](https://forum.core-electronics.com.au/u/James)\
**Post date:** [29 July 2021 03:34 UTC](https://forum.core-electronics.com.au/t/diy-storage-system-for-hardware/10847/2 "2021-07-29T03:34:38Z")

</div>

Hi Bailey,

This sounds like a great project to get started with! If you’re completely new, checking out our

> **[Arduino Workshop for Beginners - Tutorial](https://core-electronics.com.au/tutorials/arduino/arduino-workshop-for-beginners.html)**
>
> Welcome to the Arduino Workshop, where you'll be able to follow our guided course which covers everything you'll need to know in order to create your own Arduino projects and become a leveled up maker. My name is Sam and along with being a maker...

is a good place to start.  
When detecting button presses, debouncing is a crucial step, have a read of our guide:

> **[Switches, Debouncing and the Arduino - Tutorial](https://core-electronics.com.au/tutorials/arduino/switch-debouncing-with-arduino.html)**
>
> In this tutorial, we learn about switches (Poles and throws) their physical interaction with your circuit and how we can debounce them to make them more effective. We look at what bouncing is using an Oscilloscope and then use hardware and software...

After you’ve had a mess around with an Arduino, you can start thinking about how your project will be setup, how many “channels” (boxes to count) will you need? What’s your ideal system fit into your workspace?

Keen to see this come to life!  
-James
