# ESP32 Mini Development board

**URL:** <https://forum.core-electronics.com.au/t/esp32-mini-development-board/14008>\
**Category:** Projects\
**Created:** [7 May 2022 06:19 UTC](https://forum.core-electronics.com.au/t/esp32-mini-development-board/14008 "2022-05-07T06:19:35Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![simon197593](https://avatars.discourse-cdn.com/v4/letter/s/a9a28c/32.png) [@simon197593](https://forum.core-electronics.com.au/u/simon197593)\
**Post date:** [7 May 2022 06:19 UTC](https://forum.core-electronics.com.au/t/esp32-mini-development-board/14008/1 "2022-05-07T06:19:35Z")

</div>

![Screenshot (349)](https://canada1.discourse-cdn.com/flex028/uploads/core_electronics/original/2X/e/ee20a241a9b46eda2e3300499c61bf098aa15993.jpeg)  
In this project, the focus is the designing of an ESP32 development board that has the capability of WiFi, BLE, UART, 12C, 12S, and SPI. It is a project that will be suitable to run IoT devices. The design of the project is done through the KiCAD EDA and all the production files will be available for anybody who wants to proceed to the production of the board which can be done through the[PCBway](https://www.pcbway.com/)

**Components**

1. C1, 1 470uF CP1\_Small Capacitor\_SMD: CP\_Elec\_3x5.3 Polarized capacitor, small US symbol
2. C2, C3, 2 100uF C\_Small Capacitor\_SMD:CP\_Elec\_3x5. Unpolarized capacitor, a small symbol
3. C4, 1 470uF CP1\_Small Capacitor\_SMD: CP\_Elec\_3x5.4 Polarized capacitor, small US symbol
4. C5, C10, C11, 3 100nF C\_Small Capacitor\_SMD:C\_0805\_2012Metric Unpolarized capacitor, small symbol
5. C6, C8, 2 20pF C\_Small Capacitor\_SMD: C\_0805\_2012Metric Unpolarized capacitor, small symbol
6. C7, 1 10nF C\_Small Capacitor\_SMD:C\_0805\_2012Metric Unpolarized capacitor, small symbol
7. C9, 1 1uF C\_Small Capacitor\_SMD: C\_0805\_2012Metric Unpolarized capacitor, small symbol
8. FB1, 1 Ferrite\_Bead\_Small Ferrite\_Bead\_Small Ferrite\_THT: LairdTech\_28C0236-0JW-10 Ferrite bead, small symbol
9. J1, J3, 2 Conn\_01x12 Conn\_01x12 Connector\_PinHeader\_1.00mm:PinHeader\_1x12\_P1.00mm\_Vertical Generic connector, single row, 01x12, script generated (kicad-library-utils/schlib/autogen/connector/)
10. J2, 1 Conn\_01x04 Conn\_01x04 Connector\_PinHeader\_1.00mm:PinHeader\_1x04\_P1.00mm\_Horizontal Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/)
11. SW1, 1 SW\_Push SW\_Push Fuse: Fuse\_0805\_2012Metric Push button switch, generic, two pins
12. U1, 1 AP1117-33 AP1117-33 Package\_TO\_SOT\_SMD:SOT-223-3\_TabPin2 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223
13. U2, 1 STM32F031K6 STM32F031K6 Package\_QFP:LQFP-32\_5x5mm\_P0.5mm
14. Y1, 1 Crystal\_Small Crystal\_Small Crystal: Crystal\_SMD\_HC49-SD Two-pin crystal, a small symbol

**Designing of the Schematic**

1. Fire up KiCAD and proceed to new then new project and fire up the schematic window and start placing the components as shown below.

![](https://pcbwayfile.s3.us-west-2.amazonaws.com/project/22/05/07/1315450433604.png)

Check for the ESP32-WROOM symbol and place it. If the symbol is not existing you can create your symbol as shown below

![](https://pcbwayfile.s3.us-west-2.amazonaws.com/project/22/05/07/1318269365638.png)

Place all other components as you do the wire connections to end up with the schematic shown below: In the schematic, we have done the connection of the ESP32 as per the datasheet available on most component vendors’ sites. We have also done a power supply schematic to power our ESP32 at 3V3.

![](https://pcbwayfile.s3.us-west-2.amazonaws.com/project/22/05/07/1322409951258.png)

Go to annotation and annotate your schematic to give every component a unique label automatically instead of doing it manually. For example in the schematic above all capacitors have a label of C? but we can give each capacitor a label let us say C1, C2, and so on through annotation.

![](https://pcbwayfile.s3.us-west-2.amazonaws.com/project/22/05/07/1326256224184.png)

Check the electrical rules to ensure that the circuit is good and has complete functionality. Ensure there are zero earnings and errors before you proceed to the next step

![](https://pcbwayfile.s3.us-west-2.amazonaws.com/project/22/05/07/1329418047050.png)

Addition of footprints to your schematics then generate the netlists, save and proceed to PCB layout

![](https://pcbwayfile.s3.us-west-2.amazonaws.com/project/22/05/07/1335034250178.png)

**PCB Layout**

On opening the PCB layout windows, the first step is updating the footprints.

![](https://pcbwayfile.s3.us-west-2.amazonaws.com/project/22/05/07/1337408404085.png)

After updating the netlist you start arranging your components in preparation for routing. The components after being placed will give you an outlook shown below:

![](https://pcbwayfile.s3.us-west-2.amazonaws.com/project/22/05/07/1342123146455.png)

Here, after nicely arranging the components as per the schematic, the routing process starts and at the end of the routing you end up with a product similar to this:

![](https://pcbwayfile.s3.us-west-2.amazonaws.com/project/22/05/07/1345495921382.png)

Add the edge cut to give your board a desired shape from your heart.

![](https://pcbwayfile.s3.us-west-2.amazonaws.com/project/22/05/07/1347543472831.png)

Add copper pores to your board to separate the ground from the active areas.

![](https://pcbwayfile.s3.us-west-2.amazonaws.com/project/22/05/07/1350140547675.png)

**3D Generation.**

Finally, you can convert your routed PCB into a 3D view to have your nice board as shown below.

![](https://pcbwayfile.s3.us-west-2.amazonaws.com/project/22/05/07/1351306671816.png)

And this marks the end of our tutorial on how to do the mini ESP32 board design using KiCAD EDA.

The project can be odered for manufacturing through [PCBway](https://www.pcbway.com/)  
How to do it is very easy. You go to [PCBway instant quote page](https://www.pcbway.com/orderonline.aspx) and place your order accordingly

 ![Screenshot (350)](https://canada1.discourse-cdn.com/flex028/uploads/core_electronics/original/2X/3/34c76715c1aed7a571c196f35cc411f1c1ecd06a.png)

---

<div class="post-metadata">

**Author:** ![Liam120347](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/liam120347/32/5003_2.png) [@Liam120347](https://forum.core-electronics.com.au/u/Liam120347)\
**Post date:** [7 May 2022 06:49 UTC](https://forum.core-electronics.com.au/t/esp32-mini-development-board/14008/2 "2022-05-07T06:49:48Z")

</div>

Hi Simon,

Cool design, very interesting form factor!  
I like using the ESP32 dev modules such as these:[ESP32-C3 WROOM Module - 4MB (PCB Antenna) | Sparkfun WRL-18034 | Core Electronics Australia](https://core-electronics.com.au/esp32-c3-wroom-module-4mb-pcb-antenna.html)

I’m just a bit confused though, there are mentions of the STM32 and the ESP32.  
PS: I’d recommend checking out the Phils Lab’s and EEVBlog Youtube channels as you work through more designs - he has some tips for PCB design good practice.

---

<div class="post-metadata">

**Author:** ![simon197593](https://avatars.discourse-cdn.com/v4/letter/s/a9a28c/32.png) [@simon197593](https://forum.core-electronics.com.au/u/simon197593)\
**Post date:** [7 May 2022 08:51 UTC](https://forum.core-electronics.com.au/t/esp32-mini-development-board/14008/3 "2022-05-07T08:51:01Z")

</div>

Thank you for the error noticed. It was just an error and i have edited it. Thank you too for the reference. Am already enjoying the referred channel
