# Guide by Jaryd; Getting Started with the xTool S1 | Unboxing to First Cut

**URL:** <https://forum.core-electronics.com.au/t/guide-by-jaryd-getting-started-with-the-xtool-s1-unboxing-to-first-cut/24303>\
**Category:** Guides\
**Created:** [26 June 2026 21:33 UTC](https://forum.core-electronics.com.au/t/guide-by-jaryd-getting-started-with-the-xtool-s1-unboxing-to-first-cut/24303 "2026-06-26T21:33:41Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jaryd](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/jaryd/32/8778_2.png) [@Jaryd](https://forum.core-electronics.com.au/u/Jaryd)\
**Post date:** [26 June 2026 21:33 UTC](https://forum.core-electronics.com.au/t/guide-by-jaryd-getting-started-with-the-xtool-s1-unboxing-to-first-cut/24303/1 "2026-06-26T21:33:41Z")

</div>

I have just shared content in Guides \> Laser Cutting: [**“Getting Started with the xTool S1 | Unboxing to First Cut”**](https://core-electronics.com.au/guides/laser-cutting/getting-started-with-the-xtool-s1-unboxing-to-first-cut/)  
  
 ![](https://core-electronics.com.au/media/faq/P1_setup_300.jpg)  
  
  
  
[**Read more**](https://core-electronics.com.au/guides/laser-cutting/getting-started-with-the-xtool-s1-unboxing-to-first-cut/)