# HDMI Driver board for 10.1 1200 x 1920 IPS Display for LattePanda
**URL:** https://forum.core-electronics.com.au/t/hdmi-driver-board-for-10-1-1200-x-1920-ips-display-for-lattepanda/8468
**Category:** Finding Parts
**Created:** [28 September 2020 23:47 UTC](https://forum.core-electronics.com.au/t/hdmi-driver-board-for-10-1-1200-x-1920-ips-display-for-lattepanda/8468 "2020-09-28T23:47:32Z")
**Posts on this page:** 4
**Page:** 1
### Author:  [@Alex117773](https://forum.core-electronics.com.au/u/Alex117773)
#### Post date: [28 September 2020 23:47 UTC](https://forum.core-electronics.com.au/t/hdmi-driver-board-for-10-1-1200-x-1920-ips-display-for-lattepanda/8468/1 "2020-09-28T23:47:32Z")
Hi,
I recently looked at SKU: CE06729 “Waveshare 5inch LCD 800x480” as a viable project to create a front display panel for my Z840 workstation. Looks like a fast track way to jump off of one of my graphics cards via HDMI and display machine stats on the front panel of the machine as a fourth display kinda thing… bit of coding for custom stats GUI etc anyways…
I recently purchased a “10.1 1200 x 1920 IPS Display for LattePanda” SKU: FIT0515 and was looking for a more flexable/durable solution to connect the display to the LattePanda. I intend to make it all into a complete hackable project case, kinda like a laptop, but more like a “Brick” in a closable carry case 🙂
Looking at the above 5 inch FPC from HDMI driver board I was wondering if you have or know of a driver board I can use on the back of the SKU: FIT0515 so that I can run a more durable HDMI or HDMI-Mini cable instead? Maybe something like “TFP401 HDMI/DVI Decoder to 40-Pin TTL Breakout - With Touch SKU: ADA2219”.
Any ideas on a HDMI converter driver board for the FPC would be accepted with great amounts of appreciation 😃
Axle
---
### Author:  [@Oliver](https://forum.core-electronics.com.au/u/Oliver)
#### Post date: [1 October 2020 07:00 UTC](https://forum.core-electronics.com.au/t/hdmi-driver-board-for-10-1-1200-x-1920-ips-display-for-lattepanda/8468/2 "2020-10-01T07:00:30Z")
Hi Axle,
That 10.1in Latte Panda display uses a MIPI-DSI interface. We don’t have an adapter but there’s a great write up here on hackaday on putting one together:
> **[A MIPI DSI Display Shield/HDMI Adapter](https://hackaday.com/2014/08/19/a-mipi-dsi-display-shieldhdmi-adapter/)**
>
> \[Tomasz\] tipped us about the well documented MIPI DSI Display Shield / HDMI Adapter he put on hackaday.io. The Display Serial Interface (DSI) is a high speed packet-based interface for delivering v…
And here’s a datasheet for a chip from Analogue devices which you could implement in your own design:
> **[ADV7533.pdf](https://www.analog.com/media/en/technical-documentation/data-sheets/ADV7533.pdf)**
>
> 259.78 KB
While the ADA2219 is an awesome product ([here’s the link to their guide](https://learn.adafruit.com/adafruit-tfp401-hdmi-slash-dvi-decoder-to-40-pin-ttl-display)) it does not provide the correct data feed to drive that display.
As for the case, I reckon 3D printing something would definitely be your best way to go. I haven’t done a lot of low level video/display stuff myself but it’s certainly going to be an interesting project.
Regards,
Oliver
Support | Core Electronics
---
### Author:  [@Alex117773](https://forum.core-electronics.com.au/u/Alex117773)
#### Post date: [1 October 2020 08:40 UTC](https://forum.core-electronics.com.au/t/hdmi-driver-board-for-10-1-1200-x-1920-ips-display-for-lattepanda/8468/3 "2020-10-01T08:40:45Z")
Thanks heaps for the links 🙂
I will roll that around in my head for a little bit. I kinda have 2 options in mind at the moment…
Haven’t quite got to the LattePanda just yet as I am still reorganizing my computers so that I can have workstation dedicated to the electronics bench… + in the middle of building a custom HP Z840… Too many projects, not enough time lol
I will post up some projects as I get through them 🙂
Thanks
Axle
---
### Author:  [@Bryce](https://forum.core-electronics.com.au/u/Bryce)
#### Post date: [14 October 2020 03:43 UTC](https://forum.core-electronics.com.au/t/hdmi-driver-board-for-10-1-1200-x-1920-ips-display-for-lattepanda/8468/4 "2020-10-14T03:43:16Z")
Hey Alex,
Sounds like a plan, the complete chaos of throwing many things together at the same time to a state that you’re happy with them can go on forever 😂 if you’d like, you can put your projects up on our site for a store credit reward if they’re processed. I’ve attached a link for you to set that up below. Have a great day!
> **[Create a Project](https://core-electronics.com.au/create-project)**
>
> Core Electronics is a retailer for electronics in Australia including Arduino, Raspberry Pi, Sparkfun and Adafruit products. Fast shipping and support.
Bryce
Core Electronics | Support