# Help selecting a battery

**URL:** <https://forum.core-electronics.com.au/t/help-selecting-a-battery/9488>\
**Category:** Finding Parts\
**Created:** [21 February 2021 23:30 UTC](https://forum.core-electronics.com.au/t/help-selecting-a-battery/9488 "2021-02-21T23:30:26Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ben21473](https://avatars.discourse-cdn.com/v4/letter/b/7ea924/32.png) [@Ben21473](https://forum.core-electronics.com.au/u/Ben21473)\
**Post date:** [21 February 2021 23:30 UTC](https://forum.core-electronics.com.au/t/help-selecting-a-battery/9488/1 "2021-02-21T23:30:27Z")

</div>

I’m looking for a battery for the Arduino Nano 33 Sensor. Ideally, I would like it to be able to run for at least a week and be rechargeable.

I would also like to know if there is a suitable charging setup for the recommended batter.

Any help is appreciated.

---

<div class="post-metadata">

**Author:** ![Oliver](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/oliver/32/3315_2.png) [@Oliver](https://forum.core-electronics.com.au/u/Oliver)\
**Post date:** [22 February 2021 04:59 UTC](https://forum.core-electronics.com.au/t/help-selecting-a-battery/9488/2 "2021-02-22T04:59:40Z")

</div>

Hi Ben,

Are you talking about the Nano 33 BLE Sense?

> **[Arduino Nano 33 BLE Sense](https://core-electronics.com.au/arduino-nano-33-ble-sense.html)**
>
> This compact and reliable Nano board is built around the NINA B306 module for BLE and Bluetooth 5 communication; the module is based on Nordic nRF 52840 processor that contains a powerful Cortex M4F and the board has a rich set of sensors that allow...

---

<div class="post-metadata">

**Author:** ![Ben21473](https://avatars.discourse-cdn.com/v4/letter/b/7ea924/32.png) [@Ben21473](https://forum.core-electronics.com.au/u/Ben21473)\
**Post date:** [22 February 2021 05:21 UTC](https://forum.core-electronics.com.au/t/help-selecting-a-battery/9488/3 "2021-02-22T05:21:36Z")

</div>

Hi - yes that’s the one.

---

<div class="post-metadata">

**Author:** ![Bryce](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/bryce/32/3631_2.png) [@Bryce](https://forum.core-electronics.com.au/u/Bryce)\
**Post date:** [23 February 2021 02:53 UTC](https://forum.core-electronics.com.au/t/help-selecting-a-battery/9488/4 "2021-02-23T02:53:15Z")

</div>

Hi Ben,

How interesting, have you been able to calculate the average draw over that time? I’d expect it will be in the few hundred milliamp range when running, but it will depend on the particular scripts that you’re running and such. You should be able to use a USB Doctor or similar to be able to measure the draw of your particular rig which you can then use to determine the appropriate capacity of a battery to last that long.

> **[USB Charger Doctor - In-line Voltage and Current Meter (Blue)](https://core-electronics.com.au/usb-charger-doctor-in-line-voltage-and-current-meter-blue.html)**
>
> Oh no, what is going on with my USB device, it's getting HOT. Queue the USB Charger Doctor. Thanks to this little gadget you will be able to watch and care for your USB device or powered projects.

---

<div class="post-metadata">

**Author:** ![Oliver](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/oliver/32/3315_2.png) [@Oliver](https://forum.core-electronics.com.au/u/Oliver)\
**Post date:** [23 February 2021 03:33 UTC](https://forum.core-electronics.com.au/t/help-selecting-a-battery/9488/5 "2021-02-23T03:33:12Z")

</div>

Hi Ben,

Just an FYI, the regulator on the BLE 33 Sense is an MPM3610:  
[https://www.monolithicpower.com/pub/media/document/MPM3610\_r1.01.pdf](https://www.monolithicpower.com/pub/media/document/MPM3610_r1.01.pdf)

The regulator itself is good for up to 1.2A @ 3.3V. The nRF52840 on the other hand is actually a pretty low power chip. It’s 15mA per pin max, but only 20mA for all pins max - and it needs to be configured correctly to be able to achieve that.

---

<div class="post-metadata">

**Author:** ![Ben21473](https://avatars.discourse-cdn.com/v4/letter/b/7ea924/32.png) [@Ben21473](https://forum.core-electronics.com.au/u/Ben21473)\
**Post date:** [24 February 2021 00:09 UTC](https://forum.core-electronics.com.au/t/help-selecting-a-battery/9488/6 "2021-02-24T00:09:09Z")

</div>

Thanks Oliver. So if i wanted to power it from a 3.7 v lipo would i need another reg?

---

<div class="post-metadata">

**Author:** ![Oliver](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/oliver/32/3315_2.png) [@Oliver](https://forum.core-electronics.com.au/u/Oliver)\
**Post date:** [24 February 2021 00:11 UTC](https://forum.core-electronics.com.au/t/help-selecting-a-battery/9488/7 "2021-02-24T00:11:34Z")

</div>

Hi Ben,

No the onboard regulator is fine to use (and is intended to be used with an external battery). I was just pointing out an upper bound to the power consumption of the board.

---

<div class="post-metadata">

**Author:** ![Ben21473](https://avatars.discourse-cdn.com/v4/letter/b/7ea924/32.png) [@Ben21473](https://forum.core-electronics.com.au/u/Ben21473)\
**Post date:** [24 February 2021 02:06 UTC](https://forum.core-electronics.com.au/t/help-selecting-a-battery/9488/8 "2021-02-24T02:06:27Z")

</div>

Oh, perfect. Thank you!

---

<div class="post-metadata">

**Author:** ![Oliver](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/oliver/32/3315_2.png) [@Oliver](https://forum.core-electronics.com.au/u/Oliver)\
**Post date:** [24 February 2021 02:28 UTC](https://forum.core-electronics.com.au/t/help-selecting-a-battery/9488/9 "2021-02-24T02:28:18Z")

</div>

No worries 🙂 Just keep in mind the BLE has no battery management, so you’ll need to keep an eye on your battery charge status.
