# How to build a 20,000mAh power bank without auto-off function

**URL:** <https://forum.core-electronics.com.au/t/how-to-build-a-20-000mah-power-bank-without-auto-off-function/9755>\
**Category:** Support\
**Created:** [28 March 2021 23:47 UTC](https://forum.core-electronics.com.au/t/how-to-build-a-20-000mah-power-bank-without-auto-off-function/9755 "2021-03-28T23:47:39Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Lee66649](https://avatars.discourse-cdn.com/v4/letter/l/e68b1a/32.png) [@Lee66649](https://forum.core-electronics.com.au/u/Lee66649)\
**Post date:** [28 March 2021 23:47 UTC](https://forum.core-electronics.com.au/t/how-to-build-a-20-000mah-power-bank-without-auto-off-function/9755/1 "2021-03-28T23:47:39Z")

</div>

Hi.

I have an Arduino system that collects gas sensors’ data and sends them to the computer by WiFi. The Arduino Nano 33 IoT is currently powered by a 20,000mAh power bank. I set the Arduino for a one hour cycle of 50 min sleep and 10 min data collecting and so on for 40 days. The problem for now is the power bank has an auto-off feature, and probably 99.9% of power banks on the market have, which turns itself off when they detect the current draw low, for here when my Arduino is sleeping it draws less than 25 mA. I need the power bank to supply power to the Arduino system all the time. Can someone help me with designing and making a power system of 20,000mAh 5.0V and no auto-off function?

Thanks a lot.

---

<div class="post-metadata">

**Author:** ![Owen](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/owen/32/2948_2.png) [@Owen](https://forum.core-electronics.com.au/u/Owen)\
**Post date:** [29 March 2021 01:08 UTC](https://forum.core-electronics.com.au/t/how-to-build-a-20-000mah-power-bank-without-auto-off-function/9755/2 "2021-03-29T01:08:21Z")

</div>

Hey Lee,

Thanks for jumping on the forum, this is where we primarily handle most of our technical support.

You could just grab a large LiPo battery and a 5V step up regulator! Our largest capacity batteries are the [PiJuice specific LiPo’s](https://core-electronics.com.au/search/?q=pijuice+battery), which are designed to be used with the PiJuice for the Raspbery Pi, but are still more than fine to be used with a regulator, you will just use the red and black wires, the yellow is just for temperature sensing and isn’t compulsory. I’d grab [this 20,000mAh LiPo](https://core-electronics.com.au/3-pin-lipo-battery-for-pijuice-20000mah.html) and [this 5V regulator](https://core-electronics.com.au/5v-step-up-step-down-voltage-regulator-s9v11f5.html).

Hope this helps!

---

<div class="post-metadata">

**Author:** ![Arnold16700](https://avatars.discourse-cdn.com/v4/letter/a/aeb1de/32.png) [@Arnold16700](https://forum.core-electronics.com.au/u/Arnold16700)\
**Post date:** [29 March 2021 03:52 UTC](https://forum.core-electronics.com.au/t/how-to-build-a-20-000mah-power-bank-without-auto-off-function/9755/3 "2021-03-29T03:52:50Z")

</div>

@Lee66649 See if you can make something work as per Owens recommendation.

If you need something produced commercially or custom designed, shoot me a DM 👍

---

<div class="post-metadata">

**Author:** ![Lee66649](https://avatars.discourse-cdn.com/v4/letter/l/e68b1a/32.png) [@Lee66649](https://forum.core-electronics.com.au/u/Lee66649)\
**Post date:** [29 March 2021 04:16 UTC](https://forum.core-electronics.com.au/t/how-to-build-a-20-000mah-power-bank-without-auto-off-function/9755/4 "2021-03-29T04:16:53Z")

</div>

Very helpful. Thank you Owen. I am now looking to find a charging solution based on your suggestion. Will keep you updated. Cheers

---

<div class="post-metadata">

**Author:** ![Lee66649](https://avatars.discourse-cdn.com/v4/letter/l/e68b1a/32.png) [@Lee66649](https://forum.core-electronics.com.au/u/Lee66649)\
**Post date:** [29 March 2021 04:19 UTC](https://forum.core-electronics.com.au/t/how-to-build-a-20-000mah-power-bank-without-auto-off-function/9755/5 "2021-03-29T04:19:19Z")

</div>

Thanks Arnold. I wanna contact you but I can’t DM. How?

---

<div class="post-metadata">

**Author:** ![Oliver](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/oliver/32/3315_2.png) [@Oliver](https://forum.core-electronics.com.au/u/Oliver)\
**Post date:** [29 March 2021 05:06 UTC](https://forum.core-electronics.com.au/t/how-to-build-a-20-000mah-power-bank-without-auto-off-function/9755/6 "2021-03-29T05:06:33Z")

</div>

Hi Lee,

You can message someone (once you’ve reached a sufficient trust level) on the forums by clicking their username:

![image](https://canada1.discourse-cdn.com/flex028/uploads/core_electronics/original/2X/e/e77f1963e231eb1ffbb7a5439bbb78e94b852f5d.png)

FYI, you can read all about Discourse trust levels here:

> **[Understanding Discourse Trust Levels](https://blog.discourse.org/2018/06/understanding-discourse-trust-levels/)**
>
> The user trust system is a fundamental cornerstone of Discourse. Trust levels are a way of…
