# How to charge Arduino Uno with LiPo battery

**URL:** <https://forum.core-electronics.com.au/t/how-to-charge-arduino-uno-with-lipo-battery/2990>\
**Category:** Uncategorized\
**Created:** [26 June 2018 03:55 UTC](https://forum.core-electronics.com.au/t/how-to-charge-arduino-uno-with-lipo-battery/2990 "2018-06-26T03:55:47Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Melissa65348](https://avatars.discourse-cdn.com/v4/letter/m/bb73d2/32.png) [@Melissa65348](https://forum.core-electronics.com.au/u/Melissa65348)\
**Post date:** [26 June 2018 03:55 UTC](https://forum.core-electronics.com.au/t/how-to-charge-arduino-uno-with-lipo-battery/2990/1 "2018-06-26T03:55:47Z")

</div>

How do I charge an Arduino UNO board with a LiPo or standard battery pack? What products do you recommend to do this? Do I need a 5V LiPo battery or can I use a 7.4 V LiPo, I have the a few spare 7.4V LiPo’s from a previous project. What adaptors will I need? Thanks Melissa

---

<div class="post-metadata">

**Author:** ![Stephen](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/stephen/32/1599_2.png) [@Stephen](https://forum.core-electronics.com.au/u/Stephen)\
**Post date:** [26 June 2018 23:07 UTC](https://forum.core-electronics.com.au/t/how-to-charge-arduino-uno-with-lipo-battery/2990/2 "2018-06-26T23:07:20Z")

</div>

Melissa,

All you need to power the Arduino Uno is something between 5V and 12V. You can use an adapter like this one to plug into the power port:

> **[Male DC Power adapter - 2.1mm plug to screw terminal block](https://core-electronics.com.au/male-dc-power-adapter-2-1mm-plug-to-screw-terminal-block.html)**
>
> If you need to connect a battery pack or wired power supply to a board that has a DC jack - this adapter will come in very handy! There is a 2.1mm DC plug on one .. read more

You could use a battery pack like this:

> **[6xAA Battery Holder with DC2.1 Power Jack](https://core-electronics.com.au/6xaa-battery-holder-with-dc2-1-power-jack.html)**
>
> This battery holder can hold 6 AA battery which can make 7.2 V rechargeable battery pack from NiMH / NiCd cells or 9V battery pack from alkaline cells.

Or you could wire directly into the VIN and GND on the board. Each of these two inputs will accept between 6V and 12V. Do not provide power via the 5V pin, it bypasses the regulator.

I’m not sure what type of liPo battery you have if you want an adapter I suggest using the 2.1mm barrel jack.

---

<div class="post-metadata">

**Author:** ![Lindsay36840](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/lindsay36840/32/1851_2.png) [@Lindsay36840](https://forum.core-electronics.com.au/u/Lindsay36840)\
**Post date:** [5 October 2018 06:14 UTC](https://forum.core-electronics.com.au/t/how-to-charge-arduino-uno-with-lipo-battery/2990/3 "2018-10-05T06:14:22Z")

</div>

I wouldn’t use a lipo. Lipo’s need to be balance charged and they cannot handle being discharged even down to 3V without being rendered useless. If you use a lipo in place of another battery, you will need a balance charging circuit and anti discharge protection. Otherwise, the first time you use your device and the battery runs down, the Lipo will be damaged or destroyed. In my opinion, you are far better off using nicads for most projects.
