# How to connect 30 BNO055 Sensors to RPI

**URL:** <https://forum.core-electronics.com.au/t/how-to-connect-30-bno055-sensors-to-rpi/12326>\
**Category:** Raspberry Pi\
**Created:** [3 December 2021 00:07 UTC](https://forum.core-electronics.com.au/t/how-to-connect-30-bno055-sensors-to-rpi/12326 "2021-12-03T00:07:41Z")\
**Posts on this page:** 1\
**Showing post:** 19

<div class="post-metadata">

**Author:** ![Liam](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/liam/32/3562_2.png) [@Liam](https://forum.core-electronics.com.au/u/Liam)\
**Post date:** [14 December 2021 23:32 UTC](https://forum.core-electronics.com.au/t/how-to-connect-30-bno055-sensors-to-rpi/12326/19 "2021-12-14T23:32:35Z")

</div>

Hi Arindam,

As for seperate customised enclosures you’ll have a few options, CAD up your own and 3D print them, or use [a vacuum forming machine to make some quick ones](https://youtu.be/rXPGPsMZKDE).

I also think Liam was refering to the cables electrical contacts being exposed, there is definitely a risk of a short happening in there, to close up some standard crimp pins you can use [these connector housings](https://core-electronics.com.au/0-1-2-54mm-crimp-connector-housing-1x6-pin-10-pack.html)

 ![image](https://canada1.discourse-cdn.com/flex028/uploads/core_electronics/original/2X/4/44e35e70bd6373883dbd5d917c088410b368bd1b.jpeg)

For longer cables you could go down the route of creating your own, check out Core’s tutorial here: [https://core-electronics.com.au/tutorials/how-to-crimp-custom-connectors.html](https://core-electronics.com.au/tutorials/how-to-crimp-custom-connectors.html)  
There’s also been some [good discussion on cable flexibility](https://forum.core-electronics.com.au/t/ender-3-wiring/12401/10) on this topic from Bob and James, this will definitely come into play here.

Let us know how you go!  
Liam

---

_[View the full topic](https://forum.core-electronics.com.au/t/how-to-connect-30-bno055-sensors-to-rpi/12326)._