# How to not spill resin all over your desk

**URL:** <https://forum.core-electronics.com.au/t/how-to-not-spill-resin-all-over-your-desk/10721>\
**Category:** 3D Printing\
**Created:** [17 July 2021 04:03 UTC](https://forum.core-electronics.com.au/t/how-to-not-spill-resin-all-over-your-desk/10721 "2021-07-17T04:03:43Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![James84823](https://avatars.discourse-cdn.com/v4/letter/j/3bc359/32.png) [@James84823](https://forum.core-electronics.com.au/u/James84823)\
**Post date:** [17 July 2021 04:03 UTC](https://forum.core-electronics.com.au/t/how-to-not-spill-resin-all-over-your-desk/10721/1 "2021-07-17T04:03:43Z")

</div>

Hey guys,

Just sharing something I wish I knew before changing out my FEP film on my Creality LD002H:  
The films come in 3 bits, the FEP Film itself, sandwiched between two protective sheets. I installed one of the protective sheets (dumb I know), and it resulted in a bit of a mess:

 ![20210717_132239](https://canada1.discourse-cdn.com/flex028/uploads/core_electronics/original/2X/7/7df4e40bb335a775cedaf593fd473ba4d9feaad2.jpeg)

I really think Creality should put tabs with numbers on the film for idiots like me.

Happy printing!  
-James

---

<div class="post-metadata">

**Author:** ![Oliver33](https://avatars.discourse-cdn.com/v4/letter/o/a9adbd/32.png) [@Oliver33](https://forum.core-electronics.com.au/u/Oliver33)\
**Post date:** [18 July 2021 22:35 UTC](https://forum.core-electronics.com.au/t/how-to-not-spill-resin-all-over-your-desk/10721/2 "2021-07-18T22:35:12Z")

</div>

Classic! Good tip though 🙂