# IR or ultrasound sensor on kitronic motor board

**URL:** <https://forum.core-electronics.com.au/t/ir-or-ultrasound-sensor-on-kitronic-motor-board/24069>\
**Category:** Product Questions\
**Created:** [21 March 2026 06:32 UTC](https://forum.core-electronics.com.au/t/ir-or-ultrasound-sensor-on-kitronic-motor-board/24069 "2026-03-21T06:32:19Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Melanie308376](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/melanie308376/32/13270_2.png) [@Melanie308376](https://forum.core-electronics.com.au/u/Melanie308376)\
**Post date:** [21 March 2026 06:32 UTC](https://forum.core-electronics.com.au/t/ir-or-ultrasound-sensor-on-kitronic-motor-board/24069/1 "2026-03-21T06:32:19Z")

</div>

Hi,

I’m working on a hack of the Clementoni Mio robot with my kids. We’ve taken out the board and replaced with a micro:bit v2.2 and a kitronics motor board.

These holidays I’d like to extend with an IR or ultrasound sensor. Looking for advice on parts to select and how to connect to the kitronics board. Also any other suggestions for extending this project, eg LEDs or sound options

Thanks heaps!

---

<div class="post-metadata">

**Author:** ![Pixmusix](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/pixmusix/32/9719_2.png) [@Pixmusix](https://forum.core-electronics.com.au/u/Pixmusix)\
**Post date:** [21 March 2026 09:48 UTC](https://forum.core-electronics.com.au/t/ir-or-ultrasound-sensor-on-kitronic-motor-board/24069/2 "2026-03-21T09:48:06Z")

</div>

> [@Melanie308376](#):
>
> I’m working on a hack of the Clementoni Mio robot with my kids. We’ve taken out the board and replaced with a micro:bit v2.2 and a kitronics motor board.

Firstly, how cool 🥳

Ive used this one before and its easy to use. Compatible with microbit via I2C?  
Do you need a code example or are you all good?

> **[Ultrasonic Distance Sensor (RCWL-1601) - 3 to 5V](https://core-electronics.com.au/33v-ultrasonic-distance-sensor.html)**
>
> Enhance your project with the Ultrasonic Distance Sensor (RCWL-1601). Pin and software compatible with the HC-SR04 sensor, it uses echolocation to detect objects within a range of 2 to 450 cm. Now compatible with both 3.3V and 5V power supplies.

I think the kiltronics has built in i2c pullups based on my googling but please check your model.

Concerning other ideas, (depending on the age of your kids), creating an r2d2 like robot language from a buzzer? My kid would go nuts for that. 🤖 Bzz bzzzzzz. Bzz vvvvvv bzzzzz. 🤖

Also my wife was looking over my shoulder as I wrote this and she says youre awesome.

---

<div class="post-metadata">

**Author:** ![Melanie308376](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/melanie308376/32/13270_2.png) [@Melanie308376](https://forum.core-electronics.com.au/u/Melanie308376)\
**Post date:** [24 March 2026 01:06 UTC](https://forum.core-electronics.com.au/t/ir-or-ultrasound-sensor-on-kitronic-motor-board/24069/3 "2026-03-24T01:06:17Z")

</div>

Thanks for the speedy answer! I’ve ordered the sensor and few other goodies and they’ve just arrived 🙂 The R2D2 idea is brilliant - the kids (3 & 6) will for sure go for that. I should be alright on the code front, I’ll reach out if we have questions.
