# Items required for a project

**URL:** <https://forum.core-electronics.com.au/t/items-required-for-a-project/8782>\
**Category:** Uncategorized\
**Created:** [13 November 2020 00:08 UTC](https://forum.core-electronics.com.au/t/items-required-for-a-project/8782 "2020-11-13T00:08:48Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Isaac144303](https://avatars.discourse-cdn.com/v4/letter/i/b19c9b/32.png) [@Isaac144303](https://forum.core-electronics.com.au/u/Isaac144303)\
**Post date:** [13 November 2020 00:08 UTC](https://forum.core-electronics.com.au/t/items-required-for-a-project/8782/1 "2020-11-13T00:08:48Z")

</div>

Hi,  
I am searching for some items for an upcoming project. The items have been supplied for international projects and most are through suppliers in the UK which I would like to source locally if possible.  
The parts are as follows:  
1 x Power supply unit 600W (12v,50A, Constant Voltage) Amazon p/n B072M7P7QJ  
1 x Power supply 12V to 5V 3A DC/DC buck converter module Amazon p/n B00G890MIC  
1 x USB Extension Cable Amazon p/n B002M8RVKA  
1 x Ethernet Extension Cable Amazon p/n B077V421QH  
3 x Thermoelectric cooler (120W power) 12v @10A. Amazon p/n B00CGU1VOG  
16 x LED Full Spectrum Grow Light. Amazon p/n B071J3BC1W  
16 x E27 Lamp Holder. Sinolec Components Ltd p/n E27-SD04-2  
1 x Raspberry Pi 3 Model B (B+ now I think). CPC-Farnell p/n 2525225  
1 x Raspberry Pi Display 7” Touchscreen CPC-Farnell p/n 2473872  
1 x Grove Temperature & Humidity Sensor Pro. CPC Farnell p/n MK00343  
1 x Arduino Base Shield v2. CPC-Farnell p/n SC13822  
4 MK00330 Grove Relay. CPC Farnell|  
1 x Grove Solid State Relay. Mouser p/n 713-103020004  
4 x OpenBeam- 1000mm Long Black anodised Beam. Technobotsonline p/n 4451-900  
13 x OpenBeam- 750mm Long Black anodised Beam. Technobotsonline p/n 4451-750  
10 x OpenBeam- 300mm Long Black anodised Beam. Technobotsonline p/n 4451-300  
4 x MakerBeam – 90 Degree Corner Bracket. Technobotsonline p/n 4446-013  
36 x OpenBeam – ‘L’ Joining Plate. Technobotsonline p/n 4450-003  
2 x OpenBeam – ‘T’ Joining Plate. Technobotsonline p/n 4450-004

It would be fantastic if all of these could be supplied through here, and if possible please provide the prices and part numbers for ordering.  
Thank you,  
Isaac

---

<div class="post-metadata">

**Author:** ![Bryce](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/bryce/32/3631_2.png) [@Bryce](https://forum.core-electronics.com.au/u/Bryce)\
**Post date:** [13 November 2020 00:51 UTC](https://forum.core-electronics.com.au/t/items-required-for-a-project/8782/2 "2020-11-13T00:51:35Z")

</div>

Hi Isaac,

Sure, happy to help!

I’ll go through the list sequentially for you as dot points.

- Unfortunately, we don’t supply power supplies that reach that level, you may need to use an industrial supplier.

- Here’s a suitable converter we supply

> **[UBEC DC/DC Step-Down (Buck) Converter - 5V @ 3A output](https://core-electronics.com.au/ubec-dc-dc-step-down-buck-converter-5v-at-3a-output.html)**
>
> Your power supply problems just got SOLVED! This little circuit board may look tiny but inside is a high efficiency DC/DC step-down converter which can output up .. read more

- An extension cable at 1.5 foot instead of 1

> **[USB Cable Extension - 1.5 Foot](https://core-electronics.com.au/usb-cable-extension-1-5-foot.html)**
>
> This is a 1.5' long USB extension cable equipped with type A male connector on one end to plug into your computer and a type A female connector at the other that allows for a second USB cable to be inserted

- Here’s a few choices based on length required

> **[Ethernet Extension Australia](https://core-electronics.com.au/search/?q=ethernet%2Bextension)**
>
> Core Electronics is a retailer for electronics in Australia including Arduino, Raspberry Pi, Sparkfun and Adafruit products. Fast shipping and support.

- What kind of cooler are you looking for in particular? I couldn’t see the part you linked, depending on the application, you may be better to use a compressor-based system from a refrigeration company rather than the peltier we usually supply which are designed for point cooling.

- We don’t have the grow bulbs or lamp holder to match that you’d need for the project, unfortunately. You can try to mix and match some UV and high energy LED to try and match it. However, if this is for experimentation, I’d check an official source to ensure validity.

- You can use a Pi 3, although, the newest model (with the best performance) is a Pi 4 8 GB

> **[Raspberry Pi 4 Model B 8GB](https://core-electronics.com.au/raspberry-pi-4-model-b-8gb.html)**
>
> This is the NEW 8GB variant of the Raspberry Pi 4 Model B

- Here’s the official touchscreen

> **[Pi Foundation PiTFT - 7](https://core-electronics.com.au/pitft-7-touchscreen-display-for-raspberry-pi.html)**
>
> Add a display to your Raspberry Pi project using the official 7 inch touchscreen display. It's perfect for all kinds of projects and allows your Pi to mount on the back with all of the cables hidden from view.

- By the looks of it that’s a breakout for one of the DHT sensors, likely 22. You’ve got a few options, but personally, I’d recommend this one

> **[DHT22 Temperature and Humidity Sensor](https://core-electronics.com.au/dht22-temperature-and-humidity-sensor.html)**
>
> DHT22 is a compound digital temperature and humidity sensor which outputs calibrated digital signals. Thanks to the dedicated digital module acquisition technology and temperature and humidity sensing technology applied to the module, DHT22 comes...

> **[Dht22 Australia](https://core-electronics.com.au/search/?q=dht22)**
>
> Core Electronics is a retailer for electronics in Australia including Arduino, Raspberry Pi, Sparkfun and Adafruit products. Fast shipping and support.

- We’ve got a wide range of sensor and breakout shields, but unfortunately, not the exact part you’re after

- The relay

> **[Grove - Relay (Seeed Studio)](https://core-electronics.com.au/grove-relay-seeed-studio.html)**
>
> The Relay is a digital normally open switch that controls a relay capable of switching much higher voltages and currents than your normal Arduino boards. .. read more

- We don’t appear to have any of the open beam parts you’re after, however, I’d check a local metal shop and see whether they can fabricate the whole casing for your project.

If you’d like to get an official quotation or purchase order, please take the quantities and SKU of the parts from our site that I’ve linked for you and send it through to support@coreelectronics.com.au we can get that through to purchasing from there. If you have any further questions please let me know!

Bryce  
Core Electronics | Support
