# JST Jumper 2 Wire Assembly (PRT-09914)

**URL:** <https://forum.core-electronics.com.au/t/jst-jumper-2-wire-assembly-prt-09914/2373>\
**Category:** Sparkfun\
**Created:** [24 March 2018 12:33 UTC](https://forum.core-electronics.com.au/t/jst-jumper-2-wire-assembly-prt-09914/2373 "2018-03-24T12:33:35Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Core](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/core/32/57_2.png) [@Core](https://forum.core-electronics.com.au/u/Core)\
**Post date:** [24 March 2018 12:33 UTC](https://forum.core-electronics.com.au/t/jst-jumper-2-wire-assembly-prt-09914/2373/1 "2018-03-24T12:33:35Z")

</div>

This is a placeholder topic for [**“JST Jumper 2 Wire Assembly”**](http://core-electronics.com.au/catalog/product/view/sku/PRT-09914) comments.

 ![](https://canada1.discourse-cdn.com/flex028/uploads/core_electronics/original/2X/a/ae8620ab6a93c10357e71b2a6afa2a10c9339be2.jpg)  
  
This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST connector on one end, bare cable on the opposite end. It also comes with the mating connector for the JST.  
  
[**Read more**](http://core-electronics.com.au/catalog/product/view/sku/PRT-09914)

---

<div class="post-metadata">

**Author:** ![Nick45696](https://avatars.discourse-cdn.com/v4/letter/n/9de053/32.png) [@Nick45696](https://forum.core-electronics.com.au/u/Nick45696)\
**Post date:** [24 March 2018 12:33 UTC](https://forum.core-electronics.com.au/t/jst-jumper-2-wire-assembly-prt-09914/2373/2 "2018-03-24T12:33:36Z")

</div>

Can I use this to mount a sliding switch to turn on a Lipo battery? Placing a sliding switch on the positive wire and using some additional wire to solder up the female connector. The pre-assembled adafruit one is ok but I need a smaller switch with a sliding action as space is at a premium in my housing.