# Lulzbot Cura stopped working

**URL:** <https://forum.core-electronics.com.au/t/lulzbot-cura-stopped-working/2503>\
**Category:** Support\
**Created:** [16 April 2018 10:04 UTC](https://forum.core-electronics.com.au/t/lulzbot-cura-stopped-working/2503 "2018-04-16T10:04:24Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![OMC19](https://avatars.discourse-cdn.com/v4/letter/o/a88e4f/32.png) [@OMC19](https://forum.core-electronics.com.au/u/OMC19)\
**Post date:** [16 April 2018 10:04 UTC](https://forum.core-electronics.com.au/t/lulzbot-cura-stopped-working/2503/1 "2018-04-16T10:04:24Z")

</div>

Hi all,

I’ve been using Cura for my Taz 6 for roughly the last 12 months. I didn’t use it for a couple of months and now when I open it, it just goes to a white screen. I’ve tried uninstalling it and emptying the cache, but every time I reinstall it I get the same result.

Any ideas as to why it’s doing this?

Thanks,  
Owen

---

<div class="post-metadata">

**Author:** ![Aidan](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/aidan/32/1243_2.png) [@Aidan](https://forum.core-electronics.com.au/u/Aidan)\
**Post date:** [17 April 2018 01:21 UTC](https://forum.core-electronics.com.au/t/lulzbot-cura-stopped-working/2503/2 "2018-04-17T01:21:10Z")

</div>

Hey Owen,  
What operating system and version of Cura are you using?

---

<div class="post-metadata">

**Author:** ![OMC19](https://avatars.discourse-cdn.com/v4/letter/o/a88e4f/32.png) [@OMC19](https://forum.core-electronics.com.au/u/OMC19)\
**Post date:** [30 April 2018 09:22 UTC](https://forum.core-electronics.com.au/t/lulzbot-cura-stopped-working/2503/3 "2018-04-30T09:22:22Z")

</div>

Hi Aidan,

I’m using Windows 10 and have tried multiple versions of Lulzbot Cura up to 2.6.69.

Thanks,

Owen

---

<div class="post-metadata">

**Author:** ![Aidan](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/aidan/32/1243_2.png) [@Aidan](https://forum.core-electronics.com.au/u/Aidan)\
**Post date:** [30 April 2018 22:14 UTC](https://forum.core-electronics.com.au/t/lulzbot-cura-stopped-working/2503/4 "2018-04-30T22:14:42Z")

</div>

Could you try uninstalling all versions of Cura, clearing your cache, and trying out [Cura 3.2](http://devel.lulzbot.com/software/cura-lulzbot/windows/) (it’s in Beta, but it might get you through)