# Mini RFID readers

**URL:** <https://forum.core-electronics.com.au/t/mini-rfid-readers/24593>\
**Category:** Uncategorized\
**Created:** [20 November 2026 12:41 UTC](https://forum.core-electronics.com.au/t/mini-rfid-readers/24593 "2026-11-20T12:41:00Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![Vivek338372](https://avatars.discourse-cdn.com/v4/letter/v/ee7513/32.png) [@Vivek338372](https://forum.core-electronics.com.au/u/Vivek338372)\
**Post date:** [20 November 2026 12:41 UTC](https://forum.core-electronics.com.au/t/mini-rfid-readers/24593/1 "2026-11-20T12:41:00Z")

</div>

Hi,

I’ve got a project that I’m doing that requires RFID readers embedded in scrabble tiles to read NTAG213 tags stuck on the back of the scrabble tiles. The tiles are 18mm x 20mm.

I initially bought some PN532 readers; but they turned out to be 54mm x 48mm - way too big to put into a scrabble tile.

Are there any other options to get smaller compact readers. I had a look at the PN5321 with antenna; but that becomes very expensive when I need 30 readers. AI suggested using external antennas with the PN532; but I’m not so sure that would work.

Cheers,  
Vivek

---

<div class="post-metadata">

**Author:** ![Michael99645](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/michael99645/32/11893_2.png) [@Michael99645](https://forum.core-electronics.com.au/u/Michael99645)\
**Post date:** [21 November 2026 07:03 UTC](https://forum.core-electronics.com.au/t/mini-rfid-readers/24593/2 "2026-11-21T07:03:26Z")

</div>

Im trying to picture what you are wanting to do.

RFID NTAG213 is passive 14a, so the reader needs to send power to the tag, so the tag can power up and talk.  
When you say tile, do you mean a portable tile that you place on the board, or are you talking about a single place on the board where someone can place the ntag and then have the reader read it?

Since RFID is a near field thing, you would need to make sure you can read the actual tag and know you got the correct on.  
if more then one tag is in the field then you would use an anti collision to get the IDs of each tag; If you keep track of the existing tags then the new one should be the one not in your list, but if you have more then one then do you know where it is, i.e. directly on the reader or to the side of it.

If you could track the X,Y and just need the ID of a tag… 15a is much better at “longer” distances and multi tags in the field…

But, Im kinda guessing what you are trying to do…

---

<div class="post-metadata">

**Author:** ![Vivek338372](https://avatars.discourse-cdn.com/v4/letter/v/ee7513/32.png) [@Vivek338372](https://forum.core-electronics.com.au/u/Vivek338372)\
**Post date:** [21 November 2026 08:51 UTC](https://forum.core-electronics.com.au/t/mini-rfid-readers/24593/3 "2026-11-21T08:51:27Z")

</div>

I’m sticking NTAG213 tags on the back of scrabble tiles.

What I want to do is embed the readers into a scrabble tile rack so that when the tiles are placed on the rack; the readers can read what tiles have been placed where. I’ll connect the readers to an ESP32 device that can do the mapping from the tag id to the letters and then transmit the letters to another device.

So, I need something that I can embed into a hollowed out tile rack. My initial idea was to use readers placed next to each other directly under where the tiles would be placed and hope that there would be enough distance to prevent interference or detection of multiple tags. But, I need a reader small enough to match the tile size to be able to do that.

Cheers, Vivek

---

<div class="post-metadata">

**Author:** ![Michael99645](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/michael99645/32/11893_2.png) [@Michael99645](https://forum.core-electronics.com.au/u/Michael99645)\
**Post date:** [22 November 2026 00:44 UTC](https://forum.core-electronics.com.au/t/mini-rfid-readers/24593/4 "2026-11-22T00:44:21Z")

</div>

While I have not tried this with HF RFID (13.56Mhz), in theory you could get a small antenna, e.g. steel one from a fob, and use that and not the supplied antenna.

the trick here will be to match the antenna to the driver on the RFID controller board.  
i.e. LCR values.

For a reference, have a look at how the Proxmark 3 RDV4 deals with antennas.  
It has removable/swappable for different jobs.  
Im not saying use the proxmark, just a guide.

What I would do is “remove” the default antenna, measure the LCR values at 13.56 Mhz, then see how close that matches the same measurements from the fob antenna. it may be close enough to work ok.  
a litle bit of loss, in this project may be a good thing 🙂

---

<div class="post-metadata">

**Author:** ![Vivek338372](https://avatars.discourse-cdn.com/v4/letter/v/ee7513/32.png) [@Vivek338372](https://forum.core-electronics.com.au/u/Vivek338372)\
**Post date:** [22 November 2026 05:03 UTC](https://forum.core-electronics.com.au/t/mini-rfid-readers/24593/5 "2026-11-22T05:03:47Z")

</div>

Thank you. I’ll do some more research on this option and see if its doable.

I also found a molex coil - 146236-0101 - which is about the right dimensions - but not sure if the LCR values will match.

---

<div class="post-metadata">

**Author:** ![Robert93820](https://avatars.discourse-cdn.com/v4/letter/r/ac91a4/32.png) [@Robert93820](https://forum.core-electronics.com.au/u/Robert93820)\
**Post date:** [22 November 2026 05:44 UTC](https://forum.core-electronics.com.au/t/mini-rfid-readers/24593/6 "2026-11-22T05:44:30Z")

</div>

Hi **[Vivek338372](https://forum.core-electronics.com.au/u/vivek338372)**  
I don’t quite see how you are going to accurately determine which tile goes on which square on the board.  
I emphasise “accurately” here as anything less would be absolutely useless for the intended purpose.

Maybe it would be worth researching how this sort of thing is done on a chess board. I think could be similar requirement and could be adapted.  
Cheers Bob

---

<div class="post-metadata">

**Author:** ![Vivek338372](https://avatars.discourse-cdn.com/v4/letter/v/ee7513/32.png) [@Vivek338372](https://forum.core-electronics.com.au/u/Vivek338372)\
**Post date:** [22 November 2026 08:22 UTC](https://forum.core-electronics.com.au/t/mini-rfid-readers/24593/7 "2026-11-22T08:22:51Z")

</div>

Hi Bob, This is not to detect tiles on a scrabble board. Just to determine the tiles on a rack - so only ever 7 tiles on the rack.

Inteference from neighbouring tiles may be a problem - I’m hoping with HF based detection; the distance of neighbouring tiles will be far enough to not be an issue. Won’t know till I try it.

I did like your suggestion of researching chess boards and found a very good post at [https://electronics.stackexchange.com/questions/551581/detecting-chess-pieces-on-the-board](https://electronics.stackexchange.com/questions/551581/detecting-chess-pieces-on-the-board) on that.

I have used AI to help with evaluating ideas and it won’t budge from the PN532 approach.

The **PN532 V3 + Molex `146236-0101`** architecture solves the core physical challenge of a Scrabble rack: reading 7 tiles spaced **20 mm apart** without the readers interfering with each other, while hiding all electronics inside a standard-looking wooden rack.

Instead of trying to squeeze 7 full reader circuit boards directly under the tiles, this design **splits the antenna from the reader board**.

### 1. Physical Layout (Two-Tier Design)

- **Top Tier (Directly Under the 7 Tile Slots):**

- **Bottom Tier (Inside the Hollow Rack Base Cavity):**

### 2. Electrical & Multiplexing Architecture

All 7 PN532 readers are wired to a single **ESP32-C3 SuperMini** inside the rack using **SPI mode** (DIP switches on every PN532 set to `SEL0 = 0, SEL1 = 1`):

- **Shared SPI Data Bus:** Every PN532 board shares the exact same `SCK`, `MOSI`, and `MISO` pins on the ESP32-C3, plus `3.3V` and `GND`.

- **16-Channel Digital Multiplexer (`CD74HC4067`):** Because the ESP32-C3 doesn’t have enough spare GPIO pins for 7 dedicated Chip-Select (`CS`) lines, the ESP32-C3 uses 4 address pins (`S0`–`S3`) + 1 signal pin (`SIG`) to route the SPI `CS` line through a `CD74HC4067` MUX to channels `C0`–`C6` (one per PN532 board).

- **Sequential Polling with RF Shutoff (Zero Cross-Talk):**

### 3. Power & Wireless Transmission (Per Rack)

- **Battery & Charging:** A compact **450mAh LiPo** powers the rack through a flush-recessed `SS12D00G3` slide switch and a **modified TP4056 USB-C charger board**

---

<div class="post-metadata">

**Author:** ![Robert93820](https://avatars.discourse-cdn.com/v4/letter/r/ac91a4/32.png) [@Robert93820](https://forum.core-electronics.com.au/u/Robert93820)\
**Post date:** [22 November 2026 08:41 UTC](https://forum.core-electronics.com.au/t/mini-rfid-readers/24593/8 "2026-11-22T08:41:12Z")

</div>

Hi

> [@Vivek338372](#):
>
> I have used AI to help with evaluating ideas and it won’t budge from the PN532 approach.

If you use a different AI you might get different ideas. I haven’t had much to do with it yet but I think some of it has a one track mind and no 2 AI s are the same. Could be wrong here but I purchased a new computer not that long ago and the web site had a bit which would accept questions and answer using AI. Now this block had a couple of prepared questions one of which asked what I/O ports were provided like USB etc. The answer was hopelessly wrong even when there was a photo of said computer on the same page showing all connections. Turned me off a bit.I suppose one day they might all align.  
Cheers Bob
