# Mini Vibration Motor (10\*2.7mm) (FIT0774)
**URL:** https://forum.core-electronics.com.au/t/mini-vibration-motor-10-2-7mm-fit0774/18313
**Category:** Product Questions
**Created:** [18 October 2023 05:53 UTC](https://forum.core-electronics.com.au/t/mini-vibration-motor-10-2-7mm-fit0774/18313 "2023-10-18T05:53:34Z")
**Posts on this page:** 7
**Page:** 1
### Author:  [@Core](https://forum.core-electronics.com.au/u/Core)
#### Post date: [18 October 2023 05:53 UTC](https://forum.core-electronics.com.au/t/mini-vibration-motor-10-2-7mm-fit0774/18313/1 "2023-10-18T05:53:34Z")
This is a placeholder topic for [**“Mini Vibration Motor (10\*2.7mm)”**](https://core-electronics.com.au/mini-vibration-motor-10-2-7mm.html) comments.
Just as small as a fingernail, this 10\*2.7mm mini vibration motor features a strong vibration, low noise, easy to embed, and long lifespan. Powered by voltage from…
[**Read more**](https://core-electronics.com.au/mini-vibration-motor-10-2-7mm.html)
---
### Author:  [@Shuyang258491](https://forum.core-electronics.com.au/u/Shuyang258491)
#### Post date: [18 October 2023 05:53 UTC](https://forum.core-electronics.com.au/t/mini-vibration-motor-10-2-7mm-fit0774/18313/2 "2023-10-18T05:53:35Z")
I have added the FIT0774 Mini Vibration Motor to the Seeeduino XIAO pin 10. but the Motor is not working, what should I do? (The wiring is connected correctly)
---
### Author:  [@Liam120347](https://forum.core-electronics.com.au/u/Liam120347)
#### Post date: [18 October 2023 05:56 UTC](https://forum.core-electronics.com.au/t/mini-vibration-motor-10-2-7mm-fit0774/18313/3 "2023-10-18T05:56:27Z")
Welcome Shuyang,
This motor will draw too much current for an IO pin to output, you may have damaged it but to use this in future you’ll need a MOSFET or relay to control the higher power: [MOSFET Power Switch Module | Core Electronics Australia](https://core-electronics.com.au/mosfet-power-switch-module.html)
---
### Author:  [@Shuyang258491](https://forum.core-electronics.com.au/u/Shuyang258491)
#### Post date: [18 October 2023 06:16 UTC](https://forum.core-electronics.com.au/t/mini-vibration-motor-10-2-7mm-fit0774/18313/4 "2023-10-18T06:16:00Z")
May I ask how I should use it?
---
### Author:  [@Liam120347](https://forum.core-electronics.com.au/u/Liam120347)
#### Post date: [18 October 2023 07:18 UTC](https://forum.core-electronics.com.au/t/mini-vibration-motor-10-2-7mm-fit0774/18313/5 "2023-10-18T07:18:12Z")
Hi
Certainly, here’s a general guide about MOSFETs: [MOSFETs for Makers: Getting Started with High-Power Control - Tutorial Australia](https://core-electronics.com.au/guides/digital-electronics/mosfets-for-makers-getting-started-with-high-power-control/)
To connect this one I’ll use the underside of the board since it has better info:
You’ll want to use either 5V or 3v3 output from the XIAO, if you are using the power from the MCU you wont need the second ground connection.
---
### Author:  [@Peter64457](https://forum.core-electronics.com.au/u/Peter64457)
#### Post date: [23 October 2023 22:25 UTC](https://forum.core-electronics.com.au/t/mini-vibration-motor-10-2-7mm-fit0774/18313/6 "2023-10-23T22:25:13Z")
your description text (not heading) says 102.7mm probably because the \* doesn’t show up?
I was thinking thats’ big 🙂 10 x 2.7mm Ah.
---
### Author:  [@Liam](https://forum.core-electronics.com.au/u/Liam)
#### Post date: [23 October 2023 23:43 UTC](https://forum.core-electronics.com.au/t/mini-vibration-motor-10-2-7mm-fit0774/18313/7 "2023-10-23T23:43:15Z")
Hi Peter,
Welcome back!
I’ll get that fixed up right away!
Liam