# Mounting Equipment - Piicodev Ecosystem

**URL:** <https://forum.core-electronics.com.au/t/mounting-equipment-piicodev-ecosystem/16844>\
**Category:** Support\
**Created:** [15 April 2023 04:37 UTC](https://forum.core-electronics.com.au/t/mounting-equipment-piicodev-ecosystem/16844 "2023-04-15T04:37:23Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ezra224017](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/ezra224017/32/8344_2.png) [@Ezra224017](https://forum.core-electronics.com.au/u/Ezra224017)\
**Post date:** [15 April 2023 04:37 UTC](https://forum.core-electronics.com.au/t/mounting-equipment-piicodev-ecosystem/16844/1 "2023-04-15T04:37:23Z")

</div>

Hey! I was wondering if Core sold the same nylon mounting hardware - screws, nuts and standoffs - as is contained in the Piicodev kits so that I can stack more modules, because the provided amount is insufficient for my needs. Thanks for your help!

---

<div class="post-metadata">

**Author:** ![J199799](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/j199799/32/11604_2.png) [@J199799](https://forum.core-electronics.com.au/u/J199799)\
**Post date:** [15 April 2023 05:51 UTC](https://forum.core-electronics.com.au/t/mounting-equipment-piicodev-ecosystem/16844/2 "2023-04-15T05:51:51Z")

</div>

Hey Ezra,  
The PiicoDev module descriptions say that the mounting holes are M2.5. I’m not sure if Core Electronics sell the _exact_ same standoffs, but you could use something similar like [these](https://core-electronics.com.au/white-nylon-screw-and-stand-off-set-m2-5-thread.html). It seems you can get smaller amounts for lower prices if you are willing to go with a different material.

---

<div class="post-metadata">

**Author:** ![Robert93820](https://avatars.discourse-cdn.com/v4/letter/r/ac91a4/32.png) [@Robert93820](https://forum.core-electronics.com.au/u/Robert93820)\
**Post date:** [15 April 2023 06:23 UTC](https://forum.core-electronics.com.au/t/mounting-equipment-piicodev-ecosystem/16844/3 "2023-04-15T06:23:44Z")

</div>

Core sell kits of these in both black and white nylon. Kits contain lots of different lengths and are very handy.  
Search Black (or white) nylon stand off kits.  
Cheers Bob

---

<div class="post-metadata">

**Author:** ![James](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/james/32/4400_2.png) [@James](https://forum.core-electronics.com.au/u/James)\
**Post date:** [17 April 2023 00:49 UTC](https://forum.core-electronics.com.au/t/mounting-equipment-piicodev-ecosystem/16844/4 "2023-04-17T00:49:35Z")

</div>

Hi Ezra,

J and Bob are on the money here, the holes in the board are 2.7mm for clearance around an M2.5 screw. these are the 2 kits I’d recommend:

> **[White Nylon Screw and Stand-off Set – M2.5 Thread](https://core-electronics.com.au/white-nylon-screw-and-stand-off-set-m2-5-thread.html)**
>
> Totaling 420 pieces, this White Nylon M2.5 Screw Set is a must-have smörgåsbord for your workstation. You'll have more than enough screws, nuts, and hex standoffs...

> **[Black Nylon Screw and Stand-off Set – M2.5 Thread](https://core-electronics.com.au/black-nylon-screw-and-stand-off-set-m2-5-thread.html)**
>
> Totaling 380 pieces, this M2.5 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker tendencies for...