# Orientation Tracking

**URL:** <https://forum.core-electronics.com.au/t/orientation-tracking/21387>\
**Category:** Uncategorized\
**Created:** [9 December 2024 05:17 UTC](https://forum.core-electronics.com.au/t/orientation-tracking/21387 "2024-12-09T05:17:37Z")\
**Posts on this page:** 1\
**Page:** 2

<div class="post-metadata">

**Author:** ![Liam120347](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/liam120347/32/5003_2.png) [@Liam120347](https://forum.core-electronics.com.au/u/Liam120347)\
**Post date:** [13 December 2024 07:03 UTC](https://forum.core-electronics.com.au/t/orientation-tracking/21387/21 "2024-12-13T07:03:16Z")

</div>

Hi Jonny,

If you want to mount the pointing device on a gimbal, that would make Bob’s suggestion by far the simplest, you could even get away with a couple of potentiometers!

> [@James46717](#):
>
> Reading all this with interest I had a thought just now. Two cameras on the board and an AI object recognition system might work, it could detect location and distance, then zoom to work out what angle the pointer is at; maybe this is pie in the sky because I don’t know enough about AI object processing at this stage.

Definitely could work Jim! I think cameras mounted above and below the user might be the best bet here though, both cameras would have to be passed through a pose estimation model: [https://www.youtube.com/watch?v=KxYcAfuyDoc](https://www.youtube.com/watch?v=KxYcAfuyDoc)  
Then like the other methods this line could be extrapolated out to the screen

Hi Richard,

> [@Richard83832](#):
>
> Another much cheaper and simpler approach may be the use of computer vision. Your pointer would contain the computer vison camera and processor (both could be R Pi products) to run say an OpenCV algorithm to accurately determine the camera’s orientation relative to your target board.

I would hazard a guess that it would require a custom model with the final display on the screen or using unsightly landmarks at each corner [OpenCV: Camera Calibration](https://docs.opencv.org/4.x/dc/dbb/tutorial_py_calibration.html)  
The device also ought to be handled by the public - there might be some relatively expensive parts in there

> [@Pixmusix](#):
>
> Is there a meaningful difference between a temperature sensor and an IR sensor or is all just marketing.  
> [TS01\_IR\_Thermal\_Sensor\_(0-3V)\_SKU\_SEN0256-DFRobot](https://wiki.dfrobot.com/TS01_IR_Thermal_Sensor_(0-3V)_SKU_SEN0256)

Not sure off the top of my head, an IR sensor ought to provide some specs as to the wavelength it will detect, i.e. the 38KHz board will operate around 950nm

[Previous page](https://forum.core-electronics.com.au/t/orientation-tracking/21387.md?page=1)
