# Pi Pico - Sleep & Dormant states

**URL:** <https://forum.core-electronics.com.au/t/pi-pico-sleep-dormant-states/12584>\
**Category:** Raspberry Pi\
**Created:** [27 December 2021 09:22 UTC](https://forum.core-electronics.com.au/t/pi-pico-sleep-dormant-states/12584 "2021-12-27T09:22:12Z")\
**Posts on this page:** 1\
**Showing post:** 11

<div class="post-metadata">

**Author:** ![James46717](https://avatars.discourse-cdn.com/v4/letter/j/e5b9ba/32.png) [@James46717](https://forum.core-electronics.com.au/u/James46717)\
**Post date:** [5 January 2022 23:27 UTC](https://forum.core-electronics.com.au/t/pi-pico-sleep-dormant-states/12584/11 "2022-01-05T23:27:10Z")

</div>

Update:  
Project uses Pi Pico, PiicoDev CAP1203 & PiicoDev SSD1306.

_Measured currents with program running._  
19.5mA waiting sensor input, 25mA when sensor touched and LCD on.  
The Pico will be driving a relay which draws about 75mA; so total will be about 100mA.

_Measured currents in Dormant mode._  
Pi Pico = 0.3mA  
Pi Pico, CAP1203 = 0.7mA (each sensor scan = 120uA x 3 = 360uA)  
Pi Pico, CAP1203, SSD1306 = 2.2mA

Set SSD1306 to poweroff before Dormant mode.  
Pi Pico, CAP1203, SSD1306 = 1.4mA

The measured current of 0.3mA is interseting using MicroPython; I originally measured 0.8mA using the C SDK. Turning the clocks off as per `sleep.c` does not seem to make much difference in Dormant mode, probably would have a greater effect in LightSleep mode.

Regards  
Jim

---

_[View the full topic](https://forum.core-electronics.com.au/t/pi-pico-sleep-dormant-states/12584)._
