# PN532 breakout board and use on Raspberry Pi

**URL:** <https://forum.core-electronics.com.au/t/pn532-breakout-board-and-use-on-raspberry-pi/1797>\
**Category:** Raspberry Pi\
**Created:** [6 November 2017 01:16 UTC](https://forum.core-electronics.com.au/t/pn532-breakout-board-and-use-on-raspberry-pi/1797 "2017-11-06T01:16:00Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jon13024](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/jon13024/32/810_2.png) [@Jon13024](https://forum.core-electronics.com.au/u/Jon13024)\
**Post date:** [6 November 2017 01:16 UTC](https://forum.core-electronics.com.au/t/pn532-breakout-board-and-use-on-raspberry-pi/1797/1 "2017-11-06T01:16:00Z")

</div>

Guys,  
I have recently purchased a PN532 breakout board.

> **[PN532 NFC/RFID controller breakout board - v1.6](https://core-electronics.com.au/pn532-nfc-rfid-controller-breakout-board-v1-3.html)**
>
> The PN532 is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and .. read more

Id like to be able to use it on a Pi rather than an Arduino but information seems to be very limited. My preference would be to use I2C but would also use SPI if needs be.

Does anyone know if there is any good documentation out there on how to do this? So far I have only found a few sketchy libnfc papers and many references to I2C not being supported (but I think these are old docs and I2C is now supported).

I thought this maybe a good place to collate useful information in this regard.

R  
J

---

<div class="post-metadata">

**Author:** ![Michael\_R](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/michael_r/32/435_2.png) [@Michael\_R](https://forum.core-electronics.com.au/u/Michael_R)\
**Post date:** [6 November 2017 01:33 UTC](https://forum.core-electronics.com.au/t/pn532-breakout-board-and-use-on-raspberry-pi/1797/2 "2017-11-06T01:33:44Z")

</div>

How do you feel about UART? Adafruit have produced [this guide](https://cdn-learn.adafruit.com/downloads/pdf/adafruit-nfc-rfid-on-raspberry-pi.pdf) which focuses on comms over UART, but that’s just the one they’ve covered in the setup process. The library also comes with an examples directory.
