# Polymer Lithium Ion Battery - 3.7V 1000mAh (CE04377)

**URL:** <https://forum.core-electronics.com.au/t/polymer-lithium-ion-battery-3-7v-1000mah-ce04377/962>\
**Category:** Core Electronics\
**Created:** [12 May 2017 05:29 UTC](https://forum.core-electronics.com.au/t/polymer-lithium-ion-battery-3-7v-1000mah-ce04377/962 "2017-05-12T05:29:36Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![Core](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/core/32/57_2.png) [@Core](https://forum.core-electronics.com.au/u/Core)\
**Post date:** [12 May 2017 05:29 UTC](https://forum.core-electronics.com.au/t/polymer-lithium-ion-battery-3-7v-1000mah-ce04377/962/1 "2017-05-12T05:29:36Z")

</div>

This is a placeholder topic for [**“Polymer Lithium Ion Battery - 3.7V 1000mAh”**](http://core-electronics.com.au/catalog/product/view/sku/CE04377) comments.

 ![](https://canada1.discourse-cdn.com/flex028/uploads/core_electronics/original/1X/e5208ada234f351dc532ad5113eafacc7414f22a.jpg)  
  
Welcome to the awesomeness that is LiPo batteries. Polymer Lithium Ion batteries offer superior energy density with this 1000mAh battery being only 6mm in height!  
  
 [**Read more**](http://core-electronics.com.au/catalog/product/view/sku/CE04377)

---

<div class="post-metadata">

**Author:** ![Mike39081](https://avatars.discourse-cdn.com/v4/letter/m/5fc32e/32.png) [@Mike39081](https://forum.core-electronics.com.au/u/Mike39081)\
**Post date:** [12 May 2017 05:29 UTC](https://forum.core-electronics.com.au/t/polymer-lithium-ion-battery-3-7v-1000mah-ce04377/962/2 "2017-05-12T05:29:37Z")

</div>

What connector is this fitted with? I know it’s JST but not what type and how to work out polarity.

---

<div class="post-metadata">

**Author:** ![Graham](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/graham/32/54_2.png) [@Graham](https://forum.core-electronics.com.au/u/Graham)\
**Post date:** [12 May 2017 22:32 UTC](https://forum.core-electronics.com.au/t/polymer-lithium-ion-battery-3-7v-1000mah-ce04377/962/3 "2017-05-12T22:32:53Z")

</div>

Hi @Mike39081,

They are a 2-pin, PH series JST connector such as the following:

> **[JST Right-Angle Connector - Through-Hole 2-Pin](https://core-electronics.com.au/jst-right-angle-connector-through-hole-2-pin.html)**
>
> This is a 2-pin, through-hole PH series JST connector. The pins are spaced by 2mm.

---

<div class="post-metadata">

**Author:** ![Mike39081](https://avatars.discourse-cdn.com/v4/letter/m/5fc32e/32.png) [@Mike39081](https://forum.core-electronics.com.au/u/Mike39081)\
**Post date:** [20 May 2017 05:11 UTC](https://forum.core-electronics.com.au/t/polymer-lithium-ion-battery-3-7v-1000mah-ce04377/962/4 "2017-05-20T05:11:40Z")

</div>

I’m awaiting this item as it is on back order. However, I’m designing a PCB and need to know how to work out polarity.

---

<div class="post-metadata">

**Author:** ![Sam](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/sam/32/99_2.png) [@Sam](https://forum.core-electronics.com.au/u/Sam)\
**Post date:** [21 May 2017 22:22 UTC](https://forum.core-electronics.com.au/t/polymer-lithium-ion-battery-3-7v-1000mah-ce04377/962/5 "2017-05-21T22:22:18Z")

</div>

Hi Mike,

You can go off the image and see the polarity of the connectors with regards to the JST connector (the little grove on the top gives it away), however, to ensure the design is right the first time, perhaps just wait for the battery to be 100% sure.

---

<div class="post-metadata">

**Author:** ![Stu170948](https://avatars.discourse-cdn.com/v4/letter/s/eada6e/32.png) [@Stu170948](https://forum.core-electronics.com.au/u/Stu170948)\
**Post date:** [3 August 2021 00:49 UTC](https://forum.core-electronics.com.au/t/polymer-lithium-ion-battery-3-7v-1000mah-ce04377/962/6 "2021-08-03T00:49:05Z")

</div>

Hi - Is it possible to series up a number of your LiPo cells (1100mAh) to achieve a higher voltage battery? Is the regulation electronics OK with this?

---

<div class="post-metadata">

**Author:** ![Trent5487676](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/trent5487676/32/4583_2.png) [@Trent5487676](https://forum.core-electronics.com.au/u/Trent5487676)\
**Post date:** [3 August 2021 02:06 UTC](https://forum.core-electronics.com.au/t/polymer-lithium-ion-battery-3-7v-1000mah-ce04377/962/7 "2021-08-03T02:06:21Z")

</div>

Hi Stu,

While it is possible to connect LiPo pouch batteries in series to get higher voltages (this is what manufacturers do) it becomes difficult to charge them safely as multi-cell LiPos need to be balance charged.  
I when looking at the consequences of getting it wrong I think you are better of finding a battery manufactured to meet you needs, you may find racing drone batteries suitable.  
I’ve linked a battery below as an example, it has an XT30 discharge plug and a JST-XHR balance charge lead (so the charger can ensure all cells are the same voltage during charging)

> **[Turnigy Nano-Tech 500mAh 2S 25C Lipo Pack w/XT30](https://hobbyking.com/en_us/turnigy-nano-tech-500mah-2s-25c-lipo-pack-w-xt30.html?___store=en_us)**
>
> Turnigy Nano-Tech LiPo Batteries have been used by the serious RC enthusiasts due to their superior performance. Get yours from HobbyKing at the best prices.

---

<div class="post-metadata">

**Author:** ![Stu170948](https://avatars.discourse-cdn.com/v4/letter/s/eada6e/32.png) [@Stu170948](https://forum.core-electronics.com.au/u/Stu170948)\
**Post date:** [3 August 2021 10:46 UTC](https://forum.core-electronics.com.au/t/polymer-lithium-ion-battery-3-7v-1000mah-ce04377/962/8 "2021-08-03T10:46:50Z")

</div>

Thanks for the input Trent – as you guessed, I am seeking a LiPo battery for my Parrot Bebop 2 Power drone. They seem to be incredibly hard to find (I haven’t found one yet) and getting them to Australia seems impossible (nobody will transport them). Your link to Hobbyking gives me some hope, but a quick look suggests I will still struggle to find one that fits the Bebop.

---

<div class="post-metadata">

**Author:** ![Liam](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/liam/32/3562_2.png) [@Liam](https://forum.core-electronics.com.au/u/Liam)\
**Post date:** [4 August 2021 00:13 UTC](https://forum.core-electronics.com.au/t/polymer-lithium-ion-battery-3-7v-1000mah-ce04377/962/9 "2021-08-04T00:13:07Z")

</div>

Hey Stu,

I would have a look at PhaserFPV for some local drone parts, there are certainly some higher cell count’s around but as Trent mentioned there are a lot of safety considerations that come into play when using a LiPo battery!

Liam.

---

<div class="post-metadata">

**Author:** ![sascha178488](https://avatars.discourse-cdn.com/v4/letter/s/4af34b/32.png) [@sascha178488](https://forum.core-electronics.com.au/u/sascha178488)\
**Post date:** [9 October 2021 01:28 UTC](https://forum.core-electronics.com.au/t/polymer-lithium-ion-battery-3-7v-1000mah-ce04377/962/10 "2021-10-09T01:28:14Z")

</div>

Hi   
  
  
  
Can I use the below listed product with a pytrack 2.0x

- Polymer Lithium Ion Battery (LiPo) 3.7V 1100mAh  
  
  
  
Regards  
  
  
  
Sascha

---

<div class="post-metadata">

**Author:** ![James46717](https://avatars.discourse-cdn.com/v4/letter/j/e5b9ba/32.png) [@James46717](https://forum.core-electronics.com.au/u/James46717)\
**Post date:** [9 October 2021 01:47 UTC](https://forum.core-electronics.com.au/t/polymer-lithium-ion-battery-3-7v-1000mah-ce04377/962/11 "2021-10-09T01:47:26Z")

</div>

Assume you are talking about this device.

> **[Pycom Pytrack 2.0 X](https://core-electronics.com.au/pycom-pytrack-41971.html)**
>
> Pytrack 2.0 X is a newsensor shield that can be used with any Pycom multi-network modules. It contains a number of sensors, such as an accelerometer and GPS. It now has a 6 Pin connector for the new Pynode sensor range too.

Then, Yes, the specification sheet says LiPo 3.7V and about 14mA active.  
So, 3.7V 1100mAH would do just fine, should run for a couple of days no problem.

Regards  
Jim

---

<div class="post-metadata">

**Author:** ![Jayden181577](https://avatars.discourse-cdn.com/v4/letter/j/9de0a6/32.png) [@Jayden181577](https://forum.core-electronics.com.au/u/Jayden181577)\
**Post date:** [20 October 2021 22:04 UTC](https://forum.core-electronics.com.au/t/polymer-lithium-ion-battery-3-7v-1000mah-ce04377/962/12 "2021-10-20T22:04:12Z")

</div>

I noticed that the MSDS for this product is supposed to apply to various 3.7V Li-Po batteries.  
[Pouch LiPo Battery - MSDS.pdf (core-electronics.com.au)](https://core-electronics.com.au/attachments/Pouch%20LiPo%20Battery%20-%20MSDS.pdf)

Section 14 - Transport Information only lists the 3.7V, 3000mAh battery as having passed the UN38.3 test.  
Is there a document that lists the 3.7V, 1100mAh battery UN38.3 test results?  
[Polymer Lithium Ion Battery (LiPo) 3.7V 1100mAh Australia (core-electronics.com.au)](https://core-electronics.com.au/polymer-lithium-ion-battery-1000mah-38458.html?utm_source=google_shopping&gclid=CjwKCAjwh5qLBhALEiwAioods_hq2C7FznwFbdOGfx2ZyqKb3sqcFHFSx75Q9SB6xV5eYzNqDBP-AhoC-uAQAvD_BwE)

---

<div class="post-metadata">

**Author:** ![Graham](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/graham/32/54_2.png) [@Graham](https://forum.core-electronics.com.au/u/Graham)\
**Post date:** [21 October 2021 01:10 UTC](https://forum.core-electronics.com.au/t/polymer-lithium-ion-battery-3-7v-1000mah-ce04377/962/13 "2021-10-21T01:10:59Z")

</div>

Hi,

We don’t have that documentation readily available sorry. Though can confirm the same MSDS is for our range of LiPo’s.

---

<div class="post-metadata">

**Author:** ![Andrew186170](https://avatars.discourse-cdn.com/v4/letter/a/50afbb/32.png) [@Andrew186170](https://forum.core-electronics.com.au/u/Andrew186170)\
**Post date:** [3 December 2021 05:25 UTC](https://forum.core-electronics.com.au/t/polymer-lithium-ion-battery-3-7v-1000mah-ce04377/962/14 "2021-12-03T05:25:56Z")

</div>

Can you please provide a datasheet for the battery? Max. charge rate is 0.5C? Thanks 🙂

---

<div class="post-metadata">

**Author:** ![Liam120347](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/liam120347/32/5003_2.png) [@Liam120347](https://forum.core-electronics.com.au/u/Liam120347)\
**Post date:** [3 December 2021 07:20 UTC](https://forum.core-electronics.com.au/t/polymer-lithium-ion-battery-3-7v-1000mah-ce04377/962/15 "2021-12-03T07:20:56Z")

</div>

Hi Andrew,

Welcome to the forum!!

What information in particular were you after?  
I dont have one of these and I cant garuantee anything but 0.5C seems to be a safe voltage for LiPo’s, even up to 1C (From [Core’s guide](https://core-electronics.com.au/polymer-lithium-ion-battery-1000mah-38458.html)).

---

<div class="post-metadata">

**Author:** ![Bruce204483](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/bruce204483/32/6913_2.png) [@Bruce204483](https://forum.core-electronics.com.au/u/Bruce204483)\
**Post date:** [3 September 2022 01:45 UTC](https://forum.core-electronics.com.au/t/polymer-lithium-ion-battery-3-7v-1000mah-ce04377/962/16 "2022-09-03T01:45:19Z")

</div>

The battery in my 4-probe thermometer is 523450 with a 2-pin JST connector. Would this 603450 fit do you think? My 523450 is 5.2mm thick, so it should be OK size-wise. I’m just not sure about any other differences.

 ![78D8A2AF-0786-4EF4-98E8-F8900F268F8B](https://canada1.discourse-cdn.com/flex028/uploads/core_electronics/original/2X/f/f4404ff6f8550ed317365b8b9fc2feba85a974ea.jpeg)

---

<div class="post-metadata">

**Author:** ![James](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/james/32/4400_2.png) [@James](https://forum.core-electronics.com.au/u/James)\
**Post date:** [5 September 2022 05:29 UTC](https://forum.core-electronics.com.au/t/polymer-lithium-ion-battery-3-7v-1000mah-ce04377/962/17 "2022-09-05T05:29:09Z")

</div>

Hi Bruce,

It looks like it has the right connector on the end of it, so I’d say it’d be a good replacement, just watch out when comparing part numbers, as manufacturers don’t necessarily agree on which order to put the dimension numbers in.

Our product pages almost always have dimensions, so I’d bust out the calipers, or even just a ruler, to double check it’ll fit.  
 ![image](https://canada1.discourse-cdn.com/flex028/uploads/core_electronics/original/2X/c/c82b57c534d76c84835cdcecc18d5438be3ff856.png)

-James

---

<div class="post-metadata">

**Author:** ![Jin257475](https://avatars.discourse-cdn.com/v4/letter/j/ed8c4c/32.png) [@Jin257475](https://forum.core-electronics.com.au/u/Jin257475)\
**Post date:** [25 September 2023 11:01 UTC](https://forum.core-electronics.com.au/t/polymer-lithium-ion-battery-3-7v-1000mah-ce04377/962/18 "2023-09-25T11:01:08Z")

</div>

Hello. I have a bloated coffee scale that says  
-jpl 503759 3.7v (MH47359)

- 1100mAh 4.07Wh 20190803

Which battery can I replace this with?

Thank you in advance

---

<div class="post-metadata">

**Author:** ![Jeff105671](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/jeff105671/32/3729_2.png) [@Jeff105671](https://forum.core-electronics.com.au/u/Jeff105671)\
**Post date:** [25 September 2023 22:27 UTC](https://forum.core-electronics.com.au/t/polymer-lithium-ion-battery-3-7v-1000mah-ce04377/962/19 "2023-09-25T22:27:44Z")

</div>

Based on the number it would be 50mm x 37mm x 6mm but if you take careful measurements you can confirm the exact size. Then you can measure the space it has to fit in, and determine whether a 51mm x 34mm x 6mm would fit. Then you would need to confirm that the connector is the same (although changing the connector is not difficult if you are careful).

---

<div class="post-metadata">

**Author:** ![Robert93820](https://avatars.discourse-cdn.com/v4/letter/r/ac91a4/32.png) [@Robert93820](https://forum.core-electronics.com.au/u/Robert93820)\
**Post date:** [26 September 2023 00:13 UTC](https://forum.core-electronics.com.au/t/polymer-lithium-ion-battery-3-7v-1000mah-ce04377/962/20 "2023-09-26T00:13:19Z")

</div>

Hi All  
Also the number of wires. I googled that number above yesterday an some of the results had 2 wires and some 3  
Cheers Bob

[Next page](https://forum.core-electronics.com.au/t/polymer-lithium-ion-battery-3-7v-1000mah-ce04377/962.md?page=2)
