# Raspberry Pi 5 Kiosk touch screen recommendation **URL:** \ **Category:** Product Questions\ **Created:** [6 January 2025 05:06 UTC](https://forum.core-electronics.com.au/t/raspberry-pi-5-kiosk-touch-screen-recommendation/21574 "2025-01-06T05:06:14Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![Jason200550](https://avatars.discourse-cdn.com/v4/letter/j/90ced4/32.png) [@Jason200550](https://forum.core-electronics.com.au/u/Jason200550)\ **Post date:** [6 January 2025 05:06 UTC](https://forum.core-electronics.com.au/t/raspberry-pi-5-kiosk-touch-screen-recommendation/21574/1 "2025-01-06T05:06:14Z")
Happy new year guys. Looking at building a Pi 5 running in Kiosk mode with a small 3.5 touch screen. (in order to program a few buttons for a simple user interface) What would be a good solutions these days? I had a look at this this one, is this the best option? [3.5" TFT Touchscreen for Raspberry Pi | Buy in Australia | DFR0428 | DFRobot | Core Electronics](https://core-electronics.com.au/3-5-tft-touchscreen-for-raspberry-pi.html) Thanks in advanced. ---
**Author:** ![Dan](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/dan/32/10815_2.png) [@Dan](https://forum.core-electronics.com.au/u/Dan)\ **Post date:** [6 January 2025 05:43 UTC](https://forum.core-electronics.com.au/t/raspberry-pi-5-kiosk-touch-screen-recommendation/21574/2 "2025-01-06T05:43:02Z")
Hi @Jason200550 , Welcome to the forum! Looking at that screen there would be no reason that it wouldn’t work for what you’re looking to do, the resolution on the screen is pretty standard, and would work fine for your use case. ---
**Author:** ![Jason200550](https://avatars.discourse-cdn.com/v4/letter/j/90ced4/32.png) [@Jason200550](https://forum.core-electronics.com.au/u/Jason200550)\ **Post date:** [6 January 2025 21:31 UTC](https://forum.core-electronics.com.au/t/raspberry-pi-5-kiosk-touch-screen-recommendation/21574/3 "2025-01-06T21:31:17Z")
Thanks Dan 🙂 Just wondering do you had any experience with the kit. Does it need other module for it to work or it just goes over the 40 pin and installation of the driver? ---
**Author:** ![Dan](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/dan/32/10815_2.png) [@Dan](https://forum.core-electronics.com.au/u/Dan)\ **Post date:** [7 January 2025 01:04 UTC](https://forum.core-electronics.com.au/t/raspberry-pi-5-kiosk-touch-screen-recommendation/21574/4 "2025-01-07T01:04:27Z")
Hi @Jason200550 I haven’t played around with that specific display, but it will just be a matter of attaching it to the Pi and then installing the drivers, nothing else required to make it run. 🙂 ---
**Author:** ![lia262073](https://avatars.discourse-cdn.com/v4/letter/l/94ad74/32.png) [@lia262073](https://forum.core-electronics.com.au/u/lia262073)\ **Post date:** [10 January 2025 15:20 UTC](https://forum.core-electronics.com.au/t/raspberry-pi-5-kiosk-touch-screen-recommendation/21574/5 "2025-01-10T15:20:48Z")
> [@Jason200550](#): > > Looking at building a Pi 5 running in Kiosk mode with a small 3.5 touch screen. (in order to program a few buttons for a simple user interface) What would be a good solutions these days? I had a look at this this one, is this the best option? [3.5" TFT Touchscreen for Raspberry Pi | Buy in Australia | DFR0428 | DFRobot | Core Electronics](https://core-electronics.com.au/3-5-tft-touchscreen-for-raspberry-pi.html) If you want to use 3.5", the DFRobot or Waveshare models are suitable. For larger displays, the Raspberry Pi Official Display or HyperPixel are better. ---
**Author:** ![Jason200550](https://avatars.discourse-cdn.com/v4/letter/j/90ced4/32.png) [@Jason200550](https://forum.core-electronics.com.au/u/Jason200550)\ **Post date:** [12 January 2025 21:11 UTC](https://forum.core-electronics.com.au/t/raspberry-pi-5-kiosk-touch-screen-recommendation/21574/6 "2025-01-12T21:11:16Z")
> [@lia262073](#): > > Waveshare Thanks, I will look into them.