# Raspberry Pi Camera Board Case

**URL:** <https://forum.core-electronics.com.au/t/raspberry-pi-camera-board-case/16480>\
**Category:** Uncategorized\
**Created:** [23 February 2023 04:50 UTC](https://forum.core-electronics.com.au/t/raspberry-pi-camera-board-case/16480 "2023-02-23T04:50:41Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Paul225903](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/paul225903/32/8064_2.png) [@Paul225903](https://forum.core-electronics.com.au/u/Paul225903)\
**Post date:** [23 February 2023 04:50 UTC](https://forum.core-electronics.com.au/t/raspberry-pi-camera-board-case/16480/1 "2023-02-23T04:50:41Z")

</div>

For the Adafruit Raspberry Pi Camera Board Case with 1/4 Tripod Mount

> **[Adafruit Raspberry Pi Camera Board Case with 1/4 Tripod Mount](https://core-electronics.com.au/adafruit-raspberry-pi-camera-board-case-with-1-4-tripod-mount.html)**
>
> This is a basic, classic Adafruit Raspberry Pi Camera Board Enclosure with a black base and a clear top. The case is as minimal as it gets, coming in just two pieces...

Can it hold the camera board if I don’t want to use the front plastic face of the container?

---

<div class="post-metadata">

**Author:** ![Blayden](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/blayden/32/7535_2.png) [@Blayden](https://forum.core-electronics.com.au/u/Blayden)\
**Post date:** [24 February 2023 01:35 UTC](https://forum.core-electronics.com.au/t/raspberry-pi-camera-board-case/16480/2 "2023-02-24T01:35:31Z")

</div>

Hey Paul,  
Welcome to the forums!

As I understand it, the camera module is held in place by being sandwiched between the 2 acrylic pieces, with the raised acrylic mounting bits holding it in place so there’s no movement from side to side. So I doubt that it would hold very well if the top clear piece is not used.

Cheers,  
Blayden