# Raspberry Pi Pico W I2C/Piicodev Bug \[Solved\]

**URL:** <https://forum.core-electronics.com.au/t/raspberry-pi-pico-w-i2c-piicodev-bug-solved/15206>\
**Category:** Uncategorized\
**Created:** [26 September 2022 07:10 UTC](https://forum.core-electronics.com.au/t/raspberry-pi-pico-w-i2c-piicodev-bug-solved/15206 "2022-09-26T07:10:53Z")\
**Posts on this page:** 1\
**Showing post:** 26

<div class="post-metadata">

**Author:** ![James46717](https://avatars.discourse-cdn.com/v4/letter/j/e5b9ba/32.png) [@James46717](https://forum.core-electronics.com.au/u/James46717)\
**Post date:** [19 October 2022 06:18 UTC](https://forum.core-electronics.com.au/t/raspberry-pi-pico-w-i2c-piicodev-bug-solved/15206/26 "2022-10-19T06:18:49Z")

</div>

@Peter212355 I am unable to duplicate the error you are experiencing.

Pico W loaded `rp2-pico-w-20221014-unstable-v1.19.1-544-g89b320737.uf2`

Copied to Pico W from Core Electronics GitHub using Thonny the following files.

```auto
PiicoDev_Unified.py 
PiicoDev_BME280.py 
main.py

```

Ran ok as per web page screen shot.

Copied your code to Pico W, produced temp pressure and humidity values.

I think Core have updated the Piicodev files based on the post from @Michael.

Regards  
Jim

---

_[View the full topic](https://forum.core-electronics.com.au/t/raspberry-pi-pico-w-i2c-piicodev-bug-solved/15206)._