# RP Zero, Slim Case and GPIO riser

**URL:** <https://forum.core-electronics.com.au/t/rp-zero-slim-case-and-gpio-riser/8460>\
**Category:** Product Questions\
**Created:** [26 September 2020 12:50 UTC](https://forum.core-electronics.com.au/t/rp-zero-slim-case-and-gpio-riser/8460 "2020-09-26T12:50:22Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Iman134848](https://avatars.discourse-cdn.com/v4/letter/i/53a042/32.png) [@Iman134848](https://forum.core-electronics.com.au/u/Iman134848)\
**Post date:** [26 September 2020 12:50 UTC](https://forum.core-electronics.com.au/t/rp-zero-slim-case-and-gpio-riser/8460/1 "2020-09-26T12:50:22Z")

</div>

Could I check if this riser: [https://core-electronics.com.au/2x20-socket-riser-header-for-raspberry-pi-hats-and-bonnets.html](https://core-electronics.com.au/2x20-socket-riser-header-for-raspberry-pi-hats-and-bonnets.html) will physically fit the GPIO open area in RP Zero slim case: [https://core-electronics.com.au/slim-case-for-raspberry-pi-zero.html](https://core-electronics.com.au/slim-case-for-raspberry-pi-zero.html) to raise the GPIO pin higher. I am thinking of putting PImoroni Enviro+ [https://core-electronics.com.au/pimoroni-enviro-air-quality-for-raspberry-pi.html](https://core-electronics.com.au/pimoroni-enviro-air-quality-for-raspberry-pi.html) after I am done with my project.

Also would you someone be kindly enough to quickly measure tell me how high the Pimoroni Enviro+ becomes after using the riser so I can get the closest longer screw to hold the Enviro board.

Oh well, I don’t like the Pi Zero (or other system or Pis) nakedly attached to the Enviro HAT (or other HATs), if one would ask why. 😃

Thank you.

Regards,

Iman

---

<div class="post-metadata">

**Author:** ![Bryce](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/bryce/32/3631_2.png) [@Bryce](https://forum.core-electronics.com.au/u/Bryce)\
**Post date:** [14 October 2020 03:38 UTC](https://forum.core-electronics.com.au/t/rp-zero-slim-case-and-gpio-riser/8460/2 "2020-10-14T03:38:03Z")

</div>

Hey Iman,

Interesting mod, how did you go with it? If you’ve got questions as to the compatibility of parts, or spacing, or dimensions, we can check our local stock for you and measure it up if you send through the SKU/s to support@coreelectronics.com.au so that we can get the site fixed up with the appropriate info.

Bryce  
Core Electronics | Support