# RP2040 MCU based, 1.28inch Round LCD (onboard sensors) (CE09126)

**URL:** <https://forum.core-electronics.com.au/t/rp2040-mcu-based-1-28inch-round-lcd-onboard-sensors-ce09126/20287>\
**Category:** Product Questions\
**Created:** [19 June 2024 04:27 UTC](https://forum.core-electronics.com.au/t/rp2040-mcu-based-1-28inch-round-lcd-onboard-sensors-ce09126/20287 "2024-06-19T04:27:47Z")\
**Posts on this page:** 11\
**Page:** 1

<div class="post-metadata">

**Author:** ![Core](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/core/32/57_2.png) [@Core](https://forum.core-electronics.com.au/u/Core)\
**Post date:** [19 June 2024 04:27 UTC](https://forum.core-electronics.com.au/t/rp2040-mcu-based-1-28inch-round-lcd-onboard-sensors-ce09126/20287/1 "2024-06-19T04:27:47Z")

</div>

This is a placeholder topic for [**“RP2040 MCU based, 1.28inch Round LCD (onboard sensors)”**](https://core-electronics.com.au/rp2040-mcu-based-128inch-round-lcd-onboard-sensors.html) comments.

![](https://core-electronics.com.au/media/catalog/product/cache/5ba536955e3e815f4e908e49c1dd8155/C/E/CE09126-1.jpg)

RP2040 MCU Board, With 1.28inch Round LCD, accelerometer and gyroscope Sensor…

[**Read more**](https://core-electronics.com.au/rp2040-mcu-based-128inch-round-lcd-onboard-sensors.html)

---

<div class="post-metadata">

**Author:** ![Gareth273635](https://avatars.discourse-cdn.com/v4/letter/g/e0b2c6/32.png) [@Gareth273635](https://forum.core-electronics.com.au/u/Gareth273635)\
**Post date:** [19 June 2024 04:27 UTC](https://forum.core-electronics.com.au/t/rp2040-mcu-based-1-28inch-round-lcd-onboard-sensors-ce09126/20287/2 "2024-06-19T04:27:48Z")

</div>

Hi! I’m purchasing an RP2040 MCU based, 1.28inch Round LCD screen from you and I wanted to check on a suitable compatible battery?  
Thanks!

---

<div class="post-metadata">

**Author:** ![Samuel](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/samuel/32/11763_2.png) [@Samuel](https://forum.core-electronics.com.au/u/Samuel)\
**Post date:** [19 June 2024 05:15 UTC](https://forum.core-electronics.com.au/t/rp2040-mcu-based-1-28inch-round-lcd-onboard-sensors-ce09126/20287/4 "2024-06-19T05:15:35Z")

</div>

Hi @Gareth273635, welcome to the forums!

This board has a battery plug that is compatible with standard JST 2-pin batteries.

This category is probably the best place to have a look as all the batteries should be compatible as long as they are listed as 3.7v. You can choose a smaller or larger one based on your project requirements.

> **[2 Pin - LiPo Batteries - Power & Batteries Australia](https://core-electronics.com.au/power-batteries/liion-lipoly/2-pin.html)**
>
> Core Electronics is a retailer for electronics in Australia including Arduino, Raspberry Pi, Sparkfun and Adafruit products. Fast shipping and support.

Hope this helps!  
Sam

---

<div class="post-metadata">

**Author:** ![Gareth273635](https://avatars.discourse-cdn.com/v4/letter/g/e0b2c6/32.png) [@Gareth273635](https://forum.core-electronics.com.au/u/Gareth273635)\
**Post date:** [19 June 2024 05:40 UTC](https://forum.core-electronics.com.au/t/rp2040-mcu-based-1-28inch-round-lcd-onboard-sensors-ce09126/20287/5 "2024-06-19T05:40:53Z")

</div>

Thanks heaps, that’s perfect!  
Gareth

---

<div class="post-metadata">

**Author:** ![Samuel](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/samuel/32/11763_2.png) [@Samuel](https://forum.core-electronics.com.au/u/Samuel)\
**Post date:** [19 June 2024 05:43 UTC](https://forum.core-electronics.com.au/t/rp2040-mcu-based-1-28inch-round-lcd-onboard-sensors-ce09126/20287/6 "2024-06-19T05:43:22Z")

</div>

No worries, Good luck with your project! 😀

---

<div class="post-metadata">

**Author:** ![Pixmusix](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/pixmusix/32/9719_2.png) [@Pixmusix](https://forum.core-electronics.com.au/u/Pixmusix)\
**Post date:** [8 August 2026 02:07 UTC](https://forum.core-electronics.com.au/t/rp2040-mcu-based-1-28inch-round-lcd-onboard-sensors-ce09126/20287/7 "2026-08-08T02:07:33Z")

</div>

Suppose I wanted to work with this circular design. What stackable battery would be suitable? Something circular? Or something that fits within the dimensions?

---

<div class="post-metadata">

**Author:** ![Jane](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/jane/32/12622_2.png) [@Jane](https://forum.core-electronics.com.au/u/Jane)\
**Post date:** [12 August 2026 06:27 UTC](https://forum.core-electronics.com.au/t/rp2040-mcu-based-1-28inch-round-lcd-onboard-sensors-ce09126/20287/8 "2026-08-12T06:27:28Z")

</div>

Hey there, @Pixmusix,

The closest option in our range is the [120mAh 3.7V LiPo](https://core-electronics.com.au/catalog/product/view/sku/CE04374). At 28 × 13 × 5mm, it should fit neatly behind the board within its roughly 36.5mm circular footprint. I’m not aware of a suitable round cell that we stock.

I was looking up smart watch batteries for something comparable, hoping that they might have had some complicated coin cell battery the rest of us can’t get access to. But it seems that they’re using rectangular LiPos too, usually around 200–600mAh and none of ours quite fit the size range.

As far as I can see, if you wanting to make a circular device around a device this small your going to need to pad the case (maybe an extra inch in diameter which will get you past 50mm for batteries and only add another 0.5 inch on each side).

---

<div class="post-metadata">

**Author:** ![Pixmusix](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/pixmusix/32/9719_2.png) [@Pixmusix](https://forum.core-electronics.com.au/u/Pixmusix)\
**Post date:** [13 August 2026 02:32 UTC](https://forum.core-electronics.com.au/t/rp2040-mcu-based-1-28inch-round-lcd-onboard-sensors-ce09126/20287/9 "2026-08-13T02:32:19Z")

</div>

Thanks. 🙂

Now I know that I will be needing to design my own case or similar I’m on your website looking for inspiration.

Can you tell me how this product’s case works?  
Is there a hole or connector exposed by the case that allows you to connect the battery?

> **[ESP32-S3 Development Board and 1.28inch Round Touch LCD With CNC Metal Case](https://core-electronics.com.au/esp32-s3-development-board-with-128inch-round-touch-lcd-accelerometer-and-gyroscope-sensor-round-display-with-cnc-metal-case.html#)**
>
> ESP32-S3 Development Board, with 1.28inch Round Touch LCD, Compact size, Accelerometer And Gyroscope Sensor, Round Display, With CNC Metal Case...

---

<div class="post-metadata">

**Author:** ![Jane](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/jane/32/12622_2.png) [@Jane](https://forum.core-electronics.com.au/u/Jane)\
**Post date:** [14 August 2026 04:29 UTC](https://forum.core-electronics.com.au/t/rp2040-mcu-based-1-28inch-round-lcd-onboard-sensors-ce09126/20287/10 "2026-08-14T04:29:10Z")

</div>

Hey @Pixmusix,

Well, this one they actually want you to open judging by the included screwdriver.

 ![image](https://canada1.discourse-cdn.com/flex028/uploads/core_electronics/original/2X/0/03d32cbcd4811cfea36963c9c77f43eb640ce9cc.jpeg)

This one is powered via a 1.25mm pitch Molex cable. There’s not exactly much room inside, but you should be able to connect a very small lipo in there, provided you can get one with the right connector.

But as you can see there’s not exactly a slot for the battery either. With a little bit of double-sided tape you could probably affix the battery to the interior of the case.

---

<div class="post-metadata">

**Author:** ![Pixmusix](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/pixmusix/32/9719_2.png) [@Pixmusix](https://forum.core-electronics.com.au/u/Pixmusix)\
**Post date:** [15 August 2026 05:24 UTC](https://forum.core-electronics.com.au/t/rp2040-mcu-based-1-28inch-round-lcd-onboard-sensors-ce09126/20287/11 "2026-08-15T05:24:37Z")

</div>

Hmmm.  
i can see lots of small batteries on your website.  
I can also see double sided tape.

I don’t think I have the tools to figure out if any given battery would be safe inside the case or if it some component would be squishing it in a dangerous way.

Looks like industry doesn’t have too much for me here out of the box. No-ones fault.  
I’ll think about this some more.

If anyone at core or on this forum has any good simple out of the box solutions I’m keen.

---

<div class="post-metadata">

**Author:** ![Robert93820](https://avatars.discourse-cdn.com/v4/letter/r/ac91a4/32.png) [@Robert93820](https://forum.core-electronics.com.au/u/Robert93820)\
**Post date:** [15 August 2026 06:42 UTC](https://forum.core-electronics.com.au/t/rp2040-mcu-based-1-28inch-round-lcd-onboard-sensors-ce09126/20287/12 "2026-08-15T06:42:47Z")

</div>

Hi Pix

> [@Pixmusix](#):
>
> Now I know that I will be needing to design my own case or similar

If you have to print up a case could you not make provision for a LiPo OUTSIDE this case but INSIDE the one you need to design. You would have to arrange for the wires to exit the device case to connect the battery but the one you linked seems to have provision for a cable to exit so might be UK.

Both of the devices referred to here seem to have battery charging facilities via the type C connector.  
Cheers Bob
