# RS232 Serial Converter (CE04442) Logic Levels

**URL:** <https://forum.core-electronics.com.au/t/rs232-serial-converter-ce04442-logic-levels/23790>\
**Category:** Product Questions\
**Created:** [8 January 2026 05:12 UTC](https://forum.core-electronics.com.au/t/rs232-serial-converter-ce04442-logic-levels/23790 "2026-01-08T05:12:25Z")\
**Posts on this page:** 1\
**Showing post:** 14

<div class="post-metadata">

**Author:** ![Michael99645](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/michael99645/32/11893_2.png) [@Michael99645](https://forum.core-electronics.com.au/u/Michael99645)\
**Post date:** [9 January 2026 09:28 UTC](https://forum.core-electronics.com.au/t/rs232-serial-converter-ce04442-logic-levels/23790/14 "2026-01-09T09:28:21Z")

</div>

Just had a very quick play.  
This setup is  
PC → USB-RS232 → Lora Unit → over air → 2nd Lora Unit → RS232-USB → PC  
Buad 9600 8 data bits no parity 1 stop bit, (I cant remember what the default is as these will be as per when I last played).  
With this setup Its working in stream mode, so what ever I TX on one will appear on the other. e.g. On my PC I can have two putty windows open (one on each unit) what ever I type into one putty appears on the other and visa versa.

The key post from that thread (from me) would be

> [@Unable to receive data/configure SX1262 DTU](https://forum.core-electronics.com.au/t/unable-to-receive-data-configure-sx1262-dtu/19266/45):
>
> Quick update for today. I am now running on the RS232 interface. Its as per the wiki, a stock DE9 interface for RS232. I made up a pair of 3 wire cross over cables to go between the PC USB to RS232 DE9 and the Units DE9. i.e. Pin 2 to Pin 3 Pin 3 to Pin 2 Pin 5 to Pin 5 A new thing that I found, that i have not seen in the official wiki yet, is the “key” button press to rotate from RS485 - RS232 - RS422 - RS485 … is not saved, so any power cycle or unit soft restart will revert back to t…

I.e. In this unit and setup.  
USB RS232 TX - Lora RX and RX → Lora TX  
i.e. 2-3 and 3-2 with ground 5-5

Just to be clear, here is a photo of a quick test wire up. Keeping in mind a proper connection would be better, this is a quick test to clearly show what pin connected to what pin.

 ![image](https://canada1.discourse-cdn.com/flex028/uploads/core_electronics/original/2X/8/8c07ff78e135e04bb74499681bbf3d30eb4c511e.jpeg)

---

_[View the full topic](https://forum.core-electronics.com.au/t/rs232-serial-converter-ce04442-logic-levels/23790)._
