# Unreliable Servo o11 (Hub Mount) Bit

**URL:** <https://forum.core-electronics.com.au/t/unreliable-servo-o11-hub-mount-bit/5559>\
**Category:** littleBits\
**Created:** [13 June 2019 02:17 UTC](https://forum.core-electronics.com.au/t/unreliable-servo-o11-hub-mount-bit/5559 "2019-06-13T02:17:05Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![Robin57159](https://avatars.discourse-cdn.com/v4/letter/r/cc9497/32.png) [@Robin57159](https://forum.core-electronics.com.au/u/Robin57159)\
**Post date:** [13 June 2019 14:44 UTC](https://forum.core-electronics.com.au/t/unreliable-servo-o11-hub-mount-bit/5559/5 "2019-06-13T14:44:43Z")

</div>

I looked at the images for each of the LittleBit’s servos, and they do use the same servo, a Batan B1122. So switching to the cross axle servo probably won’t help, but you could probably source the servos themselves, for less than the complete LittleBits part, and replace the damaged servo.

---

_[View the full topic](https://forum.core-electronics.com.au/t/unreliable-servo-o11-hub-mount-bit/5559)._