# UPS HAT for Raspberry Pi Zero (DFR0528)

**URL:** <https://forum.core-electronics.com.au/t/ups-hat-for-raspberry-pi-zero-dfr0528/9520>\
**Category:** DFRobot\
**Created:** [25 February 2021 03:20 UTC](https://forum.core-electronics.com.au/t/ups-hat-for-raspberry-pi-zero-dfr0528/9520 "2021-02-25T03:20:56Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![Oliver33](https://avatars.discourse-cdn.com/v4/letter/o/a9adbd/32.png) [@Oliver33](https://forum.core-electronics.com.au/u/Oliver33)\
**Post date:** [27 February 2021 11:14 UTC](https://forum.core-electronics.com.au/t/ups-hat-for-raspberry-pi-zero-dfr0528/9520/6 "2021-02-27T11:14:21Z")

</div>

I find it hard to believe there’s no way to do it at all - I mean worst case you could just set up a resistor divider from the 5v input and tie a 3.3v level to one of the GPIO pins.

> [@Raspberry Pi UPS HAT (DFR0494)](https://forum.core-electronics.com.au/t/raspberry-pi-ups-hat-dfr0494/5277/17):
>
> Hi Everyone, Came across this link. Leaving it here in case it’s handy for someone in future slight_smile Regards, Oliver Support | Core Electronics

There might be something useful in the above thread.

---

_[View the full topic](https://forum.core-electronics.com.au/t/ups-hat-for-raspberry-pi-zero-dfr0528/9520)._