# Weather station arduino missing stl files **URL:** \ **Category:** Arduino\ **Created:** [18 September 2019 00:57 UTC](https://forum.core-electronics.com.au/t/weather-station-arduino-missing-stl-files/6401 "2019-09-18T00:57:59Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![Jacinta97662](https://avatars.discourse-cdn.com/v4/letter/j/8797f3/32.png) [@Jacinta97662](https://forum.core-electronics.com.au/u/Jacinta97662)\ **Post date:** [18 September 2019 00:57 UTC](https://forum.core-electronics.com.au/t/weather-station-arduino-missing-stl-files/6401/1 "2019-09-18T00:57:59Z")
Hi I have downloaded the 3d stl print for the weather station but it is only the walls and not the base or top. Can anyone please tell me where elsee I can locate it? ---
**Author:** ![Gordon](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/gordon/32/2970_2.png) [@Gordon](https://forum.core-electronics.com.au/u/Gordon)\ **Post date:** [23 September 2019 00:51 UTC](https://forum.core-electronics.com.au/t/weather-station-arduino-missing-stl-files/6401/2 "2019-09-23T00:51:24Z")
Hey @Jacinta97662, I have attached the Lid which should get you out of trouble. In his project, Stephen didn’t use a base. I hope this helps. [Weather Station 002 lid.stl](https://forum.core-electronics.com.au/uploads/short-url/x0sGgdXppkp0p6iF16q7ATp9eJI.stl) (22.2 KB) ---
**Author:** ![Jacinta97662](https://avatars.discourse-cdn.com/v4/letter/j/8797f3/32.png) [@Jacinta97662](https://forum.core-electronics.com.au/u/Jacinta97662)\ **Post date:** [23 September 2019 04:16 UTC](https://forum.core-electronics.com.au/t/weather-station-arduino-missing-stl-files/6401/3 "2019-09-23T04:16:35Z")
hi Gordon, Thanks for that. I started printing the walls, but discovered they need an lot of supports which surprised me. do you have any ideas for a better design?