# Wireless push buttons

**URL:** <https://forum.core-electronics.com.au/t/wireless-push-buttons/18049>\
**Category:** Uncategorized\
**Created:** [15 September 2023 12:12 UTC](https://forum.core-electronics.com.au/t/wireless-push-buttons/18049 "2023-09-15T12:12:23Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Donovan225210](https://avatars.discourse-cdn.com/v4/letter/d/919ad9/32.png) [@Donovan225210](https://forum.core-electronics.com.au/u/Donovan225210)\
**Post date:** [15 September 2023 12:12 UTC](https://forum.core-electronics.com.au/t/wireless-push-buttons/18049/1 "2023-09-15T12:12:23Z")

</div>

This is probably pretty simple, but I want to make 2-4 wireless buttons that’s are completely separate from each other, that interact with a buzzer or audio once a person presses either one.

Something like “Green teams scores” and “yellow team scores”. And “Green Forfeits” and Yellow Forfeits”.

I’m guessing I would need a controller with like an audio out Jack to connect to some speakers. Max wireless distance would be 60m if that.

Any suggestions?

---

<div class="post-metadata">

**Author:** ![James](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/james/32/4400_2.png) [@James](https://forum.core-electronics.com.au/u/James)\
**Post date:** [18 September 2023 00:57 UTC](https://forum.core-electronics.com.au/t/wireless-push-buttons/18049/2 "2023-09-18T00:57:46Z")

</div>

Hi Donovan,

Looks like a good candidate for our PiicoDev Transceiver board:

> **[PiicoDev Transceiver 915MHz](https://core-electronics.com.au/piicodev-transceiver-915mhz.html)**
>
> Unlock wireless communication up to 100m with this long-range transceiver.

We’ve tested the range up to 100m, so 60m should be fine so long as there isn’t too much in the way.

We even have buttons that plug into the same PiicoDev system!

> **[PiicoDev Button](https://core-electronics.com.au/piicodev-button.html)**
>
> An accessible, tactile interface adds control to your project.

If you wanted some visual feedback too, one of these could work:

> **[PiicoDev 3x RGB LED Module](https://core-electronics.com.au/piicodev-3x-rgb-led-module.html)**
>
> Add dazzle to your project with three individually controllable RGB LEDs.

A Pico, expansion board, LiPo and cables should be all you need.

> **[PiicoDev LiPo Expansion Board for Raspberry Pi Pico](https://core-electronics.com.au/piicodev-lipo-expansion-board-for-raspberry-pi-pico.html)**
>
> The PiicoDev® LiPo Expansion Board for Raspberry Pi Pico is a great way to start experimenting with Raspberry Pi Pico/RP2040. Use the on-board PiicoDev connector to quickly and easily connect with the PiicoDev family of sensor modules without...

> **[Polymer Lithium Ion Battery (LiPo) 3.7V 1100mAh](https://core-electronics.com.au/polymer-lithium-ion-battery-1000mah-38458.html)**
>
> Rely on the superior chemistry and energy density of Lithium Ion batteries for your next portable project. This battery has a capacity of 1100mAh and connects to your circuit by the attached JST connector.

> **[PiicoDev Cable Expansion Kit](https://core-electronics.com.au/piicodev-cable-expansion-bundle.html)**
>
> Top up your PiicoDev Starter kit with a range of the most used cables!

As far as audio output goes, we’ve also developed a DAC and amp board that should work well with a Pico:

> **[Makerverse 10-bit R2R DAC](https://core-electronics.com.au/makerverse-10-bit-r2r-dac.html)**
>
> Convert digital signals to analogue with this simple but impressive DAC

> **[Makerverse PAM8302 2.5W Mono Amplifier](https://core-electronics.com.au/makerverse-pam8302-2-5w-mono-amplifier.html)**
>
> A tiny, low-noise amplifier to bring sound to your project.

> **[Enclosed Speaker - 8 Ohm, 5 Watt](https://core-electronics.com.au/makerverse-enclosed-speaker-8-ohm-5-watt.html)**
>
> Turn your projects up to 11, this 5W speaker is perfect for bringing life to a project!

That’s the gist of the idea to get the juices flowing, let me know if you have any questions on how it’d all go together

---

<div class="post-metadata">

**Author:** ![Donovan225210](https://avatars.discourse-cdn.com/v4/letter/d/919ad9/32.png) [@Donovan225210](https://forum.core-electronics.com.au/u/Donovan225210)\
**Post date:** [18 September 2023 02:53 UTC](https://forum.core-electronics.com.au/t/wireless-push-buttons/18049/3 "2023-09-18T02:53:57Z")

</div>

Hey James,

Thanks for the Info.

In regards to the push button I was hoping to have it the size I’d say half a tennis ball or half a Baseball.

I think you guys have a Big Red dome button that I could use.

I’m local to Newcastle too, so do you guys run any in house courses or auch?

I’ll have a look at some of this and see if

---

<div class="post-metadata">

**Author:** ![James](https://yyz2.discourse-cdn.com/flex028/user_avatar/forum.core-electronics.com.au/james/32/4400_2.png) [@James](https://forum.core-electronics.com.au/u/James)\
**Post date:** [18 September 2023 03:02 UTC](https://forum.core-electronics.com.au/t/wireless-push-buttons/18049/4 "2023-09-18T03:02:17Z")

</div>

Hi Donovan,

Might be a little tricky getting it into a compact package, but should be doable.

Unfortunately we don’t offer in-house courses at the moment, but it’s on our radar. We used to run in-house workshops, but COVID happened and we repurposed the space.

Since you’re local, you can pick up from our warehouse (order online and select pickup as the shipping method.

All the best with this project and let me know if you need any more info.
