# Xbox rumble motor
**URL:** https://forum.core-electronics.com.au/t/xbox-rumble-motor/8716
**Category:** Finding Parts
**Created:** [31 October 2020 11:18 UTC](https://forum.core-electronics.com.au/t/xbox-rumble-motor/8716 "2020-10-31T11:18:38Z")
**Posts on this page:** 9
**Page:** 1
### Author:  [@Jason117492](https://forum.core-electronics.com.au/u/Jason117492)
#### Post date: [31 October 2020 11:18 UTC](https://forum.core-electronics.com.au/t/xbox-rumble-motor/8716/1 "2020-10-31T11:18:38Z")
Hi am after a weighted motor just like the Xbox rumble motors with the larger weight do core sell these or something similar?
I’m using it with an Arduino and motor shield to make rumble effects on my sim racing pedals and the Xbox motors work great but are hard to get and don’t last very long
They don’t have to be round as I can 3D print a cover
Any suggestions
Thanks
---
### Author:  [@Bryce](https://forum.core-electronics.com.au/u/Bryce)
#### Post date: [2 November 2020 23:49 UTC](https://forum.core-electronics.com.au/t/xbox-rumble-motor/8716/2 "2020-11-02T23:49:20Z")
Hi James,
Unfortunately, we don’t supply rumble motors in the size that you need. Although, there’s a couple of shaftless vibration motors that if you stacked together could create some decent, recognizable kick, otherwise, they’re just DC motors with an uneven distribution of weight on top, so you should be able to use just about any DC motor with a weight on the side of the shaft, and you’ll be good to go. If you’re able to, you may even be able to take the weight from the original that you’ve got there and put it on a much bigger motor. If there’s anything else that I can help you with please let me know.
> **[Shaftless Vibration Motor 10x3.4mm](https://core-electronics.com.au/shaftless-vibration-motor-10x3-4mm.html)**
>
> This tiny, button-type, vibrating motor shakes with a vibration amplitude of 0.75g and draws approximately 60 mA when 3 V is applied to its leads. The shaftless design keeps this motor small: 10 mm in diameter and 3.4 mm in height.
Bryce
Core Electronics | Support
---
### Author:  [@Jason117492](https://forum.core-electronics.com.au/u/Jason117492)
#### Post date: [4 November 2020 06:29 UTC](https://forum.core-electronics.com.au/t/xbox-rumble-motor/8716/3 "2020-11-04T06:29:52Z")
Thankyou
---
### Author:  [@Bryce](https://forum.core-electronics.com.au/u/Bryce)
#### Post date: [5 November 2020 21:46 UTC](https://forum.core-electronics.com.au/t/xbox-rumble-motor/8716/4 "2020-11-05T21:46:25Z")
You’re welcome Jason,
Please let us know if you have any further questions. 🙂
Bryce
Core Electronics | Support
---
### Author:  [@Oliver33](https://forum.core-electronics.com.au/u/Oliver33)
#### Post date: [6 November 2020 02:14 UTC](https://forum.core-electronics.com.au/t/xbox-rumble-motor/8716/5 "2020-11-06T02:14:14Z")
Fyi, the engineering-y name for a rumble motor is an eccentric mass motor, or (more colloquially) in industry a vibe motor (eg. Off a vibe feeder). Might help with your googling.
---
### Author:  [@Jason117492](https://forum.core-electronics.com.au/u/Jason117492)
#### Post date: [6 November 2020 02:33 UTC](https://forum.core-electronics.com.au/t/xbox-rumble-motor/8716/6 "2020-11-06T02:33:03Z")
Thankyou
---
### Author:  [@Liam](https://forum.core-electronics.com.au/u/Liam)
#### Post date: [6 November 2020 04:30 UTC](https://forum.core-electronics.com.au/t/xbox-rumble-motor/8716/7 "2020-11-06T04:30:52Z")
Hi Jason,
It’s a bit of a workaround but there is always the option of 3D printing an interference fit attachment to the motor shaft and unevenly distributing the weight to get your desired results.
Core stock’s a range of motors as seen here:
> **[DC Motors - Motors - Components & Parts](https://core-electronics.com.au/components/motors/dc-motors.html)**
>
> Core Electronics is a retailer for electronics in Australia including Arduino, Raspberry Pi, Sparkfun and Adafruit products. Fast shipping and support.
Regards,
Liam.
---
### Author:  [@Jason117492](https://forum.core-electronics.com.au/u/Jason117492)
#### Post date: [6 November 2020 07:23 UTC](https://forum.core-electronics.com.au/t/xbox-rumble-motor/8716/8 "2020-11-06T07:23:26Z")
Hi Liam
Awesome idea I’ll do some research on that
---
### Author:  [@Bryce](https://forum.core-electronics.com.au/u/Bryce)
#### Post date: [12 November 2020 23:24 UTC](https://forum.core-electronics.com.au/t/xbox-rumble-motor/8716/9 "2020-11-12T23:24:34Z")
Hi Jason,
If you don’t have a printer and need a few of these we actually operate that service here if you need it.
> **[Maker Services](https://core-electronics.com.au/services.html)**
>
> We're powered by makers, for makers. We provide services such as laser cutting, 3D printing and PCB milling from sunny Newcastle NSW, delivered Australia wide.
Bryce
Core Electronics | Support