Guide by Jaryd; How to Control a Water Pump with a Raspberry Pi Pico

I have just shared content in Guides > Raspberry Pi Pico: “How to Control a Water Pump with a Raspberry Pi Pico”





Read more

1 Like

Thanks for sharing. For this type of motors I used L293D. I hope Makerverse Motor Driver performs better.

Hi @ahsrab292840

So long as you’re not trying to draw more than 1.6A continuously (2A in short bursts) with voltages less than 16V you should have no issues with that driver.

1 Like

Thanks a lot for the mention of current.