DC Motor with Magnetic Encoder - 6V with 1:298 Gear Ratio - cables

Support DFRobot
1

Hey all,

DC Motor with Magnetic Encoder - 6V with 1:298 Gear Ratio

I have a tonne of these little DC encoder motors that I use for my automated camera slider with pan / tilt for DSLRs, and, unfortunately in the mess that is my workshop or workbench or parts drawers or whatever, I have misplaced about 6 of the connector cables for these motors.

Does anyone know the specifics for the connector so that I can get more cables, or know were I can get them?

1 Like
2

Hi Andrew,

Taking a look at our identifying electrical connectors guide, measuring the pitch of the connector and taking a look at what they physically look like It narrows it down to JST with a pitch of around 1.5 mm.

I grabbed a 6pin - JST-ZH from stock and can confirm that it fits!
Liam

3

Awesome, thanks heaps, I’ll grab some :+1:
It might be good to link them from the motor page so that people can find the replacements.

2 Likes
4

Hi Andrew,

No worries! I’ve jotted down a note to make sure they get updated!
Let us know if there is anything else we can help with!

Liam

1 Like