I am using a Raspberry Pi4, Snake hood and two 240x240 TFT displays. Following the Adafruit site careful I have used the 32 bit os but whenever it gets to the final upload reboot the Raspberry Pi restarts with a code page but nothing happens to the screens. The backlights are on and the wiring is very clearly correct. Any ideas on how to get them working?
1 Like
Hi there, Richard,
There could be quite a few possibilities here, but if you’re confident that the wiring is correct we will move past it for now and ask a couple of quick questions.
Could I ask what you mean by code page? Do you mean the Bash Shell or a specific .py file.
Could you reply to this post with the output of the following shell command:
cat /etc/rc.local
