PICODev display

[Pixmusix]

@R_DJ

Thanks @Pixmusix for the help ,

Pleasure

@R_DJ

I also purchased the cable which has vcc and gnd that connects into the expansion board, since it’s using different wires to my ardunio components will it still work? Below is an example of the cable

On the tread below, @Aaron said that you could cut the cables and tin the wires.

Picodev oled display

Hi @Christian134891, Welcome to the Forums!!! I think we all would be really keen to see pictures of this project. It sounds really interesting. As for cutting the cable and connecting directly to the Pico. this shouldn’t be a problem. Just want to make sure the SDA, SCL, Ground and 3.3V to the correct pins on the Pi.

Alternatively, when I was thinking about breaking into the PICO ecosystem I came across this which you may prefer.

PiicoDev Adapter for Breadboards

Pix